Backup Camera for 2007-2018 Jeep Wrangler JK: Starlight Night Vision 720P AHD and TVI Waterproof HD Spare Tire Mount Backup Reverse Rear View Camera for Jeep Wrangler JK 2007-2018

Descripción

Product description NATIKA HD Backup camera for 2007-2018 Jeep Wrangler JK support 2 location mount option, mounting at 12 o'clock or 6 o'clock on the spare, no distorted & no-fish-eye effect, 0.005Lux starlight level night vision, IP69K IP rating reliable waterproof and horizontal 135 degrees wide view angle. This spare tire mount rear view camera for Jeep Wrangler JK 2007-2018 with 2 useful wire loops: * Cut the GREEN wire loop to remove the distance guidelines. * Cut the WHITE wire loop to choose AHD format (720P, 30fps, NTSC) video signal output. ** Please power on again after you cut any color wire loops, then the image should be correct. ** Note: this camera is a Spare Tire Mount HD Backup camera for Jeep Wrangler JK 2007-2018 with the guidelines and CVBS format video signal output as DEFAULT. ** The distance guidelines will disappear after you cut the white wire loop, regardless of whether you cut the green wire loop,then you can use the head unit's self-existent distance guidelines. What you get: 1 x NATIKA Backup camera for Jeep Wrangler; 1 x 19.69ft/6M Extension Wire/Cable; 3 x Retaining Clips; 1 x Factory radio adapter; 1 x Panel Remover; 7 x Zip Ties; 1 x Electrical Tape; 1 x User Manual; 1 x Thanks Card; 1 x NATIKA Gift Box * HD backup camera for Jeep Wrangler JK 2007-2018 support both CVBS and AHD format video signal option(great for Android stereos). CVBS by default,cut the white wire loop to choose AHD format(720P,1280*720pixels) video signal output, It is much clearer than CVBS(960H,960*576pixels) image.Also It with starlight level night vision (0.005Lux, excellent low-light performance), you never worry about parking at night or in dark garage. * HD rear view camera for Jeep Wrangler JK 2007-2018 support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, you absolutely no need to worry about water, fog or mist inside. CAUTION: * Before you cut this HD rear camera for Jeep Wrangler JK 2007-2018’s white wire loop to choose AHD format (720P 30fps NTSC) video signal output, please make sure your Android stereo support AHD video signal input first(most of old Android OS and Japanese brands stereos do not support it), and it works well on selected ATOTO stereos (can work well on F7 Series, S8 series and A6 KarLink version and can not work on ATOTO A6Y Series Android stereo or SA102 Starter). * Keep this spare tire mount HD backup camera for Jeep Wrangler JK 2007-2018’s short camera wire and 26ft extension wire away from high temperature area, such as engine or exhaust. Also please clean this spare tire mount backup camera’s lens regularly to free it from dirt, water drops, snow drops and etc. * This HD backup car camera for Jeep Wrangler JK 2007-2018 doesn’t fit sucked type dash cams and mirror dash cams, because these dash cams have different connectors and PIN definition, even some of them with same 4 PIN connector. * If connect this HD reverse camera for Jeep Wrangler JK 2007-2018 to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation. * After install this HD backup car camera for Jeep Wrangler JK 2007-2018, if the image on the screen is blurry, flickering/flash,black, black-and white, has horizontal or vertical strip, please check all your power and video connections to make sure all of them are solid. Possibly use a different ground point(iron/metal part) and wrap power and video plugs with electrical tape to insulate from interference. If it still can’t be solved, please order a DC 12V power adapter filter rectifier or relay to clear the video signal. * This HD rear view camera for Jeep Wrangler JK 2007-2018 is perfect for rear only,head unit NOT include. * If you use T-taps to connect this HD reverse camera for Jeep Wrangler JK 2007-2018 to power source (reversing light), please kindly check and see if it works (connection is solid or not). * Before you routing this spare tire mount HD backup car camera for Jeep Wrangler JK 2007-2018’s 19.69ft extension wire inside of vehicle body, if there is no image on the screen, other than check the backup car camera, please check the video input setup, find the button “R-CAM Interrupt”and choose “ON",then start to test backup camera. You can use other device with RCA connector, such as TV or a small 4.3”/5” /7” monitor to check if the camera works, because the issue come from the head unit, not backup camera some times. * If you want to adjust this 720P AHD backup camera for Jeep Wrangler JK 2007-2018's view angle, just use your hand to move up or down the camera body. * If this 720P AHD reverse camera for Jeep Wrangler JK 2007-2018 is mounted offset, the guidelines on image will be offset. * This 720P AHD rear view camera for Jeep Wrangler JK 2007-2018’s output video signal system is NTSC, so your head units or control boxes’ signal input have to be setting up to be NTSC, NOT PAL. Starlight Level Night Vision 720P AHD 2007-2018 Jeep

Características

• Backup camera for 2007-2018 Jeep Wrangler JK(NOT JL). NOTE:it with a adapter for connecting backup camera to factory display radio, but requires dealer ($120) or yourself ($50-$60) to reprogram. Also it can not work with sucked type dash cams and mirror dash cams
• Reverse camera with a LATEST 6pcs FULL glasses F1.8 large aperture optical system and horizontal 135 degree wide view angle lens,the image without distorted effect ,you will get a crystal realistic view when you backing up.Also you can check the invisible blind spot clearly and make parking safe and simple
• Rear view camera for Jeep Wrangler JK 2007-2018 support 3 kinds: CVBS,AHD and TVI video signal output(great for Android stereos).CVBS by default,cut the purple wire loop to choose AHD format video signal (AHD,720P,30fps) and cut the blue wire loop to choose TVI format video signal (TVI,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance),you never worry about parking during night, rainy day or in dark garage
• Backup camera housing's materials are zinc alloy, 2 heavy duty brackets and all of screws are REAL 304 stainless steel, you never worry about rust and deformed issue after years used. It built in 4 multifunctional switching wire loops: cut the white loop for front view, cut the green loop to remove the guidelines, cut the purple and blue wire loop to separately choose AHD and TVI format video signal output
• Cut the purple wire loop to choose AHD format video signal output for selected ATOTO stereos (F7 Series, S8 series and A6 KarLink version,can not work on ATOTO A6Y Series Android stereo or SA102 Starter). And cut the blue wire loop to display the HD image in TRUE 720P HD on compatible Kenwood DNR1007XR, DNR1008RVS, DMX1057XR, DMX1037S, DNX997XR, DDX9907XR, and DMX958XR receivers stereos
• This backup car camera for 2007-2018 Jeep Wrangler JK doesn't fit sucked type dash cam, mirror dash cam and cheap carplay device, because these devices with different connectors (without RCA female connentor) or inside PIN definition, even some of them with same size 4 PIN connector. If connect it to a GPS navigator, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation
• Reverse camera for Jeep Wrangler JK 2007-2018 adopts a unique enhanced 4 waterproofing processes: PCB-Coating, Sealing adhesive, Filled potting and finally specially-designed waterproof structure to ensure its superb waterproof performance(up to IP69K IP rating). You absolutely no need to worry about water, fog or mist inside. Also it include a wire harness for complete installation if your 2007-2018 Jeep Wrangler JK a FACTORY RADIO
• Customer satisfaction is our top priority! NATIKA offer 24 months replacement warranty,lifetime support guarantee and 7 days-24 hours professional customer service and technical support

Especificaciones