BACOENG Brass Electric Solenoid Valve 3/4" AC110V (NPT, Normally Closed)

Descripción

Product description BACOENG Manufacturer & Distributor of Top Pneumatic Supplies Keep piping clean before installation Note the insulation of the circuit Install solenoid valve in the direction of water flow BACOENG Solenoid Valves (Normally Closed) Product Feature: The valve body part is made of high quality material, with strong corrosion resistance, sturdy and durable. BACOENG Solenoid valve uses electric signal, can work for automatic or Remote control, property stably, easy to use. With the use of pure copper coil, the valve can be opened and closed in one second, and the service life is far more than one million times. Parameters: Pipe size: 3/4" Voltage:AC 110V Material: Brass Operation Mode: Normally Closed Available : Water, Gas, Oil (non-corrosive) Thicker Pipe Wall & Clear Threads Thickened pipe wall, resistant to high load, and long service lifeClear interface threads are not easy to slide, and the connection is precise and not easy to leak Flow Direction The valve body is marked with inlet and outlet arrow indication, please use according to the inlet and outlet signs.Solenoid valve coil keep in a vertical position. High Quality Copper Coil The copper coil is lower resistance than aluminum coil.It can adapt to high-temperature environments and has good stability and corrosion resistance after long-term use. Wiring No Polarity, + and – can be interchanged.For two-wires solenoid valve, you do not need to distinguish between positive and negative poles and its performance would not be affected at all. Usage Scenarios Warm Tips: 1. Keep the pipeline as clean as possible before installation. 2. When installing the solenoid valve, be sure to wrap the appropriate raw material tape around the pipe threads and adjust the position of the solenoid valve. 3. Pay attention to the insulation of the circuit. 4. Please install the direction of the solenoid valve according to the direction of water flow. 5.Note that your solenoid valve is a VITON gasket, NBR gasket, or other type. NBR gaskets are not intended for use with gasoline, kerosene, or other corrosive liquid products. If your valve needs to be used for these, you can purchase a valve with a VITON gasket from BACOENG. BAP0004 BAP0715 BAP0310 BAP0558 BAP0308 BAP1345 Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.2 out of 5 stars 139 4.3 out of 5 stars 277 4.3 out of 5 stars 277 4.1 out of 5 stars 267 4.2 out of 5 stars 83 4.0 out of 5 stars 18 Price $13.99$13.99 $72.99$72.99 $23.99$23.99 $25.99$25.99 $32.99$32.99 $38.99$38.99 Pipe Size 1/4" 2" 1/2" 3/8" 1/2" 3/4" Orifice Size 4mm 50mm 16mm 16mm 16mm 20mm Rated voltage DC 12V AC 110V AC 110V DC 12V AC 110V AC 110V Material Brass Brass Brass Brass Stainless Steel Brass VITON/NBR NBR NBR NBR VITON NBR NBR Type Normally Closed Normally Closed Normally Closed Normally Closed Normally Closed Normally Open

Características

• Pipe Size: 3/4" ; Thread standard: NPT ; Material: Brass (if stainless steel, it is food safety)
• The solenoid valve operates at 110V AC. It is N/C (Normally Closed), meaning it is turned off when there is no power supply. This means higher security
• Easy installation：Both cables can be used as either positive or negative poles, making the installation convenient and easy.
• More durable: Use of copper core coil enhances durability and provides powerful performance, ensuring long-lasting stability.
• Widely used: Widely applicable to the opening and closing of pipelines using water, gas, and other liquids as working media (such as outdoor garden irrigation, water control in pipelines, water supply to water heaters, household pipelines, etc.).

Especificaciones