Battery for Bose SoundLink Mini I Speaker 7.4V 21.46Wh 2900mAh | High Capacity,US Version | Compatible with Mini 1 (Not Gen 2) | No Control Board or Cable Included

Descripción

Product description ONLY FIT FOR BOSE MINI 1st EMAKS EMAKS is an internet discount store providing our customers lots of product in a range of categories including latop accessories and more.Our goal is to give our customers the most for their money in an easy safe,and convenient way. Emaks Professional Battery Product Description - Battery Type : Li-ion Voltage : 11.1 V - Capacity : 2900MmAh/ 21.46Wh - Replace Part Number: 061384 061385 061386 21cr19/65 - What you get: 1 * Emaks Soundlink Mini replacement battery 1 * T8 Torx screwdriver. [ ONLY FOR BOSE SOUNDLINK MINI 1 US Version ] [ Our battery is without cable] Compatible Models :(Find your model:"Ctrl"+"F" ) Bose SoundLink Mini one US verion Bose SoundLink Mini Speaker one US verion Bose SoundLink Mini Speaker I US verion Not for Bose Soundlink EU version Not for Bose Soundlink Mini II Not for battery with cable Not for 063404 063404 ONLY For Bose SoundLink Mini One Speaker (US Version) ONLY Fit Battery Model: 061384 061385 061386 063287 CANNOT Fit Battery Model: 063403 063404 ONLY Fit Model: Bose Soundlink Mini One Speaker -- US version CANNOT Fit Model: Bose Soundlink Mini One Speaker -- EU version There are several different batteries for Bose min 1 speaker. Please double check your oem battery before purchasing. Troubleshooting - Flashing Red/Yellow causes and solutions The red light flashes 1. Hold down the power button for 10 seconds to try to restore factory Settings. 2. Still red, try to replace the battery; The indicator light is normal, which proves that the battery is faulty and the motherboard is no problem. 3. If the light is still red, replace the mainboard. The yellow light flashes This is bose's battery protection design, more than 24 days no power on, will automatically turn on the protection, charging state long press the function key for 20 seconds, and then continue to charge 2-3 hours on it; To avoid buying mistakes,please see the picture: How to Distinguish Bose Mini Speaker Method 1 :Check Speaker Charging Port Bose Mini 1: Circular charging port Bose Mini 2: USB charging port Method 2:Check speaker Top Operation Panel Bose Mini 1: Have AUX and mute buttons Bose Mini 2: No AUX and mute buttons Method 2:Check the orginial battery Bose Mini 1: Battery Without Control Board / Without Connection Cable Bose Mini 2: Battery with Control Board / With Connection Cable ATTENTION: ATTENTION: - How to find my speaker model number? The speaker model number is located on the back or bottom of the speaker. - Does the battery work with Soundlink Mini 2nd? No!Only work on Soundlink mini 1st. - Does this battery come with a cable? This battery does not come with a cable - Is it suitable to replace all bose mini I batteries? No, our products are not suitable for bose mini I EU version, bose mini I 063403 063404. - Product features: *High Capacity Cells:The Emaks 21.46Wh 2900mAh Battery is sepecially designed for your Bose Soundlink Mini One.The high capacity powers your Bose Soundlink mini One and you can easily and quickly recharge it. *Easy to install: Remove your Bose Soundlink back cover and insert the battery. *SAFE TO USE: Built-in circuit protection ensures both safety and stability (over charging, short circuit, high temperature, and surge protection). *Exclusive expert technical guidance: We will provide you with 1 to 1 expert technical guidance, and propose solutions for your Bose Soundlink problems. *Long Exchange Time:We provide the 18 Month Exchange time for our Emaks replacment battery.By purchasing our battery, you will not only get a good quality battery, but also EMAKS lifetime. Equipment Troubleshooting: - My soundink mini won't charge, the battery indicator is flashing red: Press and hold down the centre "multifunction" button (the button with 3 dots) for at least 10 seconds, you should see all of the LEDS light up, this resets the speaker. - Replaced my battery, all LED lights are now iluminated: Try resetting the speaker with the mute button and see if it fixes the ise: Connect the speaker to power Press and hold the Mute button for 10 seconds. The LEDs will flash briefly. Press the Power button to tur the speaker back on If you are still getting the same LEDs iluminated, and can't get the system to power on properly after this reset, it could be a miscommunication between the LEDS and the battery. - My SoundLink Mini isn't turning on! 1. Make sure your speaker is plugged into a working AC socket. 2. Check the connections between your speaker and the power adaptor. 3. Make sure you are using the power adaptor supplied with your speaker upon purchase. 4. If you are using a surge protector, check to see if it is working properly. 5. If you still cant get your speaker to turn on you may have a faulty power adaptor. 6. If your speaker is not charged or used within a 14 day period it with enter protection mode. Connect the speaker to the AC power adaptor to fix this issue. 7. Make sure the battery has sufficient charge to power on

Características

• 【Compatibility – Verify Before Purchase】：✔ ONLY for Bose SoundLink Mini I (US Version). ✔ONLY Replaces Bose battery:061384, 061385, 061386, 61384, 61385, 61386, 63287, 21CR19/65, 2ICR19/65. ❌ NOT compatible with:All 2 generation,All II generation，063403/063404，all EU/International Versions,battery with Control Board,battery with cable
• 【Troubleshooting Test – Before Purchase】：Please conduct a Troubleshooting test based on the specific situation of your bose soundlink before purchasing and purchase the corresponding accessories according to the specific situation.
• 【Longer Playtime, Smaller Size】：Enjoy up to 20% longer playtime with our upgraded 2900mAh battery replacement for your Bose SoundLink Mini I (US Version). Perfect for extended listening sessions without compromising portability!
• 【Critical Installation Guide】Use included T8 Torx screwdriver to safely replace the battery. Ensure speaker is powered off before installation. If charging fails after installation:Check speaker’s power converter (common issue with older Mini I models).
• 【Quality Assurance -Free Support】Free T8 Torx screwdriver included – no extra tools needed - Tested for safety. Unconditional a year policy if incompatible or defective！

Especificaciones