BIGTREETECH TMC2209 V1.3 UART Controlador de motor paso a paso 2.8A Peak Stepstick Controlador silencioso para Manta M8P, Octopus V1.1, Octopus Pro, SKR 3, SKR V1.4 Turbo, SKR Pro V1.2 Placa de control de impresora 3D (2 PCS)

Descripción

Product description The TMC2209 V1.3 is an ultra-quiet two-phase stepper motor driver chip with a continuous drive current of 2A and a peak current of 2.8A. Compared to the TMC2208, the drive current is improved by 0.6A--0.8A, while the Blockage increases the stall detection function. Provides up to 256 segments; stallguard4TM stall detection, which can feed back an abnormal signal when the motor rotates abnormally Coolstep current dynamic adjustment, saving 75% of energy Power supply voltage (VM): 4.75V---28V DC; Peak current: 2.8A; Effective current: 2A; Subdivision optional: 2, 4, 8, 16 (reduced to 256) Maximum segmentation: 256 segments; Operating mode: STEP/DIR and UART Precautions 1. Always disconnect the power supply before installing the drive to prevent the drive from burning. 2. Be sure to confirm the direction of the drive before installing the drive to prevent the drive from being burnt due to reverse connection. 3. Do not plug or unplug the drive module with power to avoid damage. 4. When installing the heat sink, pay attention to the contact between the heat sink and the pin header.Stop drive short circuit. 5, the product is sensitive to static electricity, please handle it carefully when using, it is best to move it again when using In addition to packaging. 6, must be used to heat the drive before use (heat sink, cooling fan)

Características

• The motor is not easy to lose step; ultra-quiet mode
• A large area of thermal pad, reduce the temperature of the driving work
• Prevent motor shake
• Support stall detection
• Support STEP / DIR and UART mode

Especificaciones