Bomba de sifón KATUMO, bomba de transferencia de combustible de manguera de sifón manual para gasóleo y agua | Bomba de transferencia manual adecuada para cortadora de césped, motocicleta, tractor y tanque de pescado, hecha de material de PVC duradero, pesa 171 g

Descripción

Product description Efficient Hand Fuel Pump for Daily Simple and Emergency Needs Specifications: Material: Rubber / PVC / MetalOuter Dia. of hose: 10mm / 0.39"Thickness of hose: 2mm / 0.08"Length of longer hose: 1.2 m / 47"Length of shorter hose: 0.8 m / 31" Note: The two hoses are in diferent size. The longer hose or the shorter hose can be placed at the source container or the target container bases on your use condition. Method 1 - Gravity Required The source fluid should be higher 11 inch or more than the target one (The greater the height difference, the better the effect).Put the metal clips on one end of each hose, then connect the hoses to both end of the pump bulb.Secure the end of the hose and pump bulb with clips, make it won’t leak fluid. Fix the hose to the container with the hose retainer, that can stay the hose into the container and will not slip out.Put the input hose into the source fluid, the black arrow which on the pump bulb points to the exit flow direction. Then squeeze the pump bulb 3 to 4 times.When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then the liquid will keep flowing naturally.When the fluid level is too low at the bottom of the source container, the pressure will not enough to keep fluid flowing naturally, then need to keep squeezing the pump bulb with hand to finish the pumping job. Method 2 - No Gravity Required There is no height difference required between the source container and target container, BUT need to KEEP squeezing the pump bulb BY HAND to finish the job.Put the clip on one end of each hose, then connect the hoses to both end of the pump bulb.Secure the junction of hose and pump bulb with clip, make it won’t leak fluid. Fix the hose to the container with the hose retainer, that can stay the hose into the container and will not slip out.Put the input hose into the source fluid, the black arrow which on the pump bulb points to the direction of flow. Then squeeze the pump bulb 3 to 4 times.When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then keep squeezing the pump bulb continually with hands to control the flow rate, till the transfer job done. Self-check Points When Siphon Pump Can't Work Normally The source container which you want to get rid of fluid is placed HIGHER than the target container when using the “Gravity Required” way.Both of the source container and the target one are not in a sealed state.The indicator arrow which on the pump bulb towards to the exit flow direction, down to the target container.Both of the hoses are not knotted or twisted together.Exhaust the gas out from the hoses before using.Keep the end of the two hoses inside the containers during using, NOT just on the surface. What You Get Pump Bulb x1 Hose(31'' / 47'') x2 Metal Clip x2 Hose Retainer x1 See More

Características

• Efficient Manual Siphon Pump: Hand siphon hose pump for gasoline, oil, water, diesel and other common liquids, ideal for emergency transfer. Also suits for fish tank, aquarium tank, small fountain and small air cushion swim pool water transfer. NOT for edible oil, drink water, salt water and any chemical liquids
• Easy and Safe Siphon Pump: This gas siphon hand pump weights 171g only, Say Good-bye to the dangerous and inefficient mouth suction way. Just connect the hoses to the pump bulb, the black arrow towards the fluid following direction, put the upper hose into the source tank, a few squeezes of the bulb will get the fluid started following, then put the lower hose into the receiver tank, the fluid will flow automatically (The source fluid must be higher 11 inch or more than the receiver)
• Premium Quality Rubber: The pump bulb is made of high quality rubber, thick and sturdy, build-in stop valve prevent backflow of the fluid for siphoning liquid flow quicker and faster. With 2 flexible PVC transparent hoses for visual liquid flow progress, high temperature and corrosion resistant, can be used for a long time. (The two hoses are in different size. The longer hose or the shorter hose can be placed at the source container or the target container based on your use condition)
• Clip and Retainer Use: The two metal clips are for fixing the hoses in place with the pump bulb, prevent slippage or leakage. And an adjustable hose retainer is for keeping the hose standing into the container or receiver, avoid slipping out and permit one hand-free operation
• Multi-Use Manual Transfer Hose Pump: Lightweight hand siphon fuel Hose pump is enough for simple daily use, suits for medium and small type equipments without anti-theft filter net, such as brush cutter, lawn mover, hedge trimmer, snow blower, motorcycle, scooter, ATV, lawn tractor etc, NOT for big truck types

Especificaciones