BTECH UV-50X2 (Segunda generación) Base móvil de doble banda de 50 vatios, radio móvil: VHF, UHF Amateur (Ham)

Descripción

Product description UV-50X2 (Second Generation) 50W Mobile Two Way Radio Second Generation The UV-50X2 is very much the same radio, our users have come to enjoy, with several new functionality improvements. The UV-50X2 has seen several performance improvements and tweaks in its second generation release. RJ45 Audio Input & Output The UV-50X2 has new menus and operations that allow audio I/O from its RJ45 microphone port. This allows the UV-50X2 to be installed for custom applications, where users want more control on where the speaker and mic audio is routed to. VOX Handsfree Support The UV-50X2 (Second Generation) includes VOX support. VOX allows for handsfree use with your favorite audio accessories or the included handheld microphone. In the Box: UV-50X2 Mobile Radio DTMF Handheld Microphone 6.5' Direct Connect 12V Leads Vehicle Mounting Bracket Screws & Mounting Hardware Easy-to-read Manual (written in the US) RJ-45 to Kenwood K1 Accessory Adaptor BTECH Radios are not like other similar looking radios. BTECH radios are designed in the USA with custom firmware and internal hardware differences. BTECH radios are backed with a full US support. A BTECH label means you are getting the best radio available! A few of our highlighted differences are below: BTECH radios use an upgraded Power ChipsetCustomizable PTT Return Times: When handling multiple conversations, the radio allows users to customize if the radio automatically switches to respond to active channels, or allow the user to set one channel default to transmit on.Dual Synchronize Display Mode: Synchronize Up to 2 Channels - and display both their channel name and channel frequency!Microphone Audio Gain Settings: Sound great and customize your microphone output for any repeaterExpanded Frequency Range SupportAuto Power Off Function: Save your battery and prevent unnecessary power drainingChannel Mode Editing Settings: Edit saved memory channels on-the-fly; our radio does not require you to delete a channel to make changesNew Scanning Modes: Auto Scan (Scan with a power reboot), Scanning Resume, and Variable Frequency ScanningQuad Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission - customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequenciesRandomization Privacy Mode RJ45 to K1 Audio Adaptor The UV-50X2 includes a RJ45 to K1 Audio Adaptor. K1 Audio accessories are used on our BTECH handheld radios, and now you can use those same accessories with your mobile radios! The radio includes special menus to allow audio to be routed both through the UV-50X2 and K1 accessory, only through the radio, or only through the K1 audio accessory. Uniquely customize your UV-50X2 The X-Series Mobiles use our Multi-Color LCD display screen. You can adjust the complete display colors to be exactly as you want it. Beyond the display, you can fully customize your channels to display their alpha-numeric names or frequency settings. There are 200 programmable memory channels. You can add or remove channels from scanning list. You can easily program from a PC or right on the radio itself. Pair the UV-50X2 with the Nagoya UT-72 Magnetic Mount Antenna for easy installation with the UHF antenna connectors. Group Tones supported The UV-50X2 supports the most common Analog Tones. It supports CTCSS, DCS, 2Tone, 5Tone, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-50X2 supports the latest standards. The UV-50X2 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones; or it can receive incoming DTMF tones to allow for remote stun or kill commands Quad Watch and Display Sync The UV-50X2 operates as multiple radios in one, with either VHF or UHF as the 'Main' band, while simultaneously watching up to 3 other frequencies or channels; and, if you like, you can configure your UV-50X2 for simultaneous VHF-VHF or UHF-UHF operation, too! Additionally, as a new feature added: you can monitor both VFO (frequency) and channel modes simultaneously. Dual Sync DIsplay: With Dual Sync Display, you can synchronize channel lines to one or two channels. This allows you to sync display 'lines' to a single channel allowing the user to have both frequency and channel name data displayed simultaneously. Technical Specifications Bands Supported VHF & UHF Dual Band Radio Memory Channel 200 Channels Output power 50W/5W Tone Support CTCSS, DCS, 5TONE, 2TONE, DTMF Accessory Jack Mono Speaker Output In Rear, RJ45 Audio Output in Front, K1 Accessories support with included Adaptor Additional Features Display Sync, Nuisance Channel Scan Skip, SOS Alarm, NOAA Weather Channels, Transmit Time-Out, Busy Channel Lockout, DTMF Keypad, Adjustable Scanning Modes, Quad Watch, Adjustable Squelch Size 5.7 (w) x 1.85 (h) x 7.5

Características

• El UV-50X2 se ha actualizado con soporte de E/S de audio a través del puerto de micrófono RJ45. También se incluye un adaptador de audio K1. El conector para accesorios K1 es el conector para accesorios de radio más común del mercado. Esto significa que el UV-50X2 tiene el soporte más amplio de accesorios de audio del mercado de accesorios, lo que le permite encontrar los mejores accesorios para el uso que le dé a su radio.
• El UV-50X2 incluye todo el hardware de montaje necesario para conectar fácilmente a cualquier vehículo. Puede utilizar el UV-50X2 como estación base en casa o en la oficina con la fuente de alimentación RPS-30M opcional (no incluida).
• Accesorios recomendados: empareje el UV-50X2 con la antena de montaje magnético Nagoya UT-72 para una fácil instalación. Se recomienda el cable PC04 FTDI para facilitar la programación de la computadora.
• El UV-50X2 funciona como múltiples radios en uno, con 144 MHz o 430 MHz como banda TX/RX "principal", mientras mira simultáneamente hasta otras 3 frecuencias o canales; y, si lo desea, también puede configurar su UV-50X2 para operación simultánea VHF-VHF o UHF-UHF.
• El kit incluye: BTECH UV-50X2, adaptador de audio RJ45 a K1, micrófono de altavoz, cable de CC, soportes para radio y micrófono, accesorios de montaje y guía del usuario

Especificaciones