Cable XLR a 1/4 de 6.6 pies, paquete de 2 - TRS balanceado a XLR macho 22 AWG Cable para monitor de estudio Canales L/R codificados por colores, interfaz de audio o mezclador a monitor de estudio o altavoz PA (no para micrófono)

Descripción

The Vital Link Between Your Audio Interface and Studio MonitorsBuilding a home recording studio? The connection between your sound source and your speakers is critical. The SNANSHI Balanced 1/4 Inch TRS to XLR Male Cable (2-Pack) is the ultimate TRS to XLR solution, engineered to deliver the true, uncolored sound your music deserves.Why Choose This 1/4 to XLR Male Set? Studio monitors are used in stereo pairs. Our 2-Pack provides a complete 1/4 to XLR cabling solution in one purchase. Whether you call it a quarter inch to xlr adapter or a TRS to XLR cable, this kit ensures you are ready to connect instantly.True Balanced "Noise-Free" Architecture Don't let buzzing ruin your mix. This XLR to 1/4 cable uses a balanced 3-conductor design to cancel out interference. It is far superior to cheap unbalanced cords, providing a dead-silent noise floor for your XLR to TRS connections.Technical SpecificationsCable Type: Balanced Interconnect (1/4 TRS to XLR Male).Connectors: Gold-Plated 6.35mm (1/4 Inch) TRS to 3-Pin XLR Male.Wiring: Tip to Pin 2, Ring to Pin 3, Sleeve to Pin 1.Conductor: Oxygen-Free Copper (OFC).Application: 1/4 to XLR male connection for speakers and mixers.Universal Compatibility Designed for "Output to Input" connections:Source (1/4" Output): Audio Interfaces, DJ Controllers, Mixers.Destination (XLR Input): Powered Studio Monitors, PA Speakers.Function: Works perfectly as a male xlr to 1/4 balanced patch cord.⚠️ CRITICAL BUYING GUIDE1. NOT for Microphones: This is a Male to Male cable. Microphones require an XLR Female connector.2. Direction: Ideally used as 1/4 to XLR (Interface to Speaker).3. Signal: Transmits Balanced Mono. Not a stereo splitter.

Características

• Important note: This cable has two male plugs (one-quarter inch TRS male and XLR male); it does not connect to microphones, which require an XLR female port; for mic use, search XLR female to male; designed for balanced line-level output to monitor input only
• Heavy-duty 22 AWG conductor: Uses oxygen-free copper for lower resistance and cleaner balanced signal transmission from audio interface to studio monitor; thicker gauge reduces signal loss compared to standard 24 AWG cables
• Compatibility check before buying: Requires a source device with one-quarter inch TRS outputs and a destination device with XLR male inputs; compatible with Focusrite Scarlett 2i2, KRK Rokit, Yamaha HS series, and JBL 305P MkII
• Dual shielding construction: Aluminum foil layer plus ninety-eight point five percent OFC braided copper spiral eliminates EMI and RFI interference; three-conductor balanced design cancels common-mode noise for clean audio in studio, stage, or home recording environments
• Two-pack for complete stereo setup: Each cable carries one mono balanced channel; connect cable one from left interface output to left monitor XLR input and cable two from right output to right monitor; both cables required for full stereo playback
• Color-coded connector rings for easy channel identification: One cable features a black ring and the other a red ring; instantly identify left and right channels without tracing cables behind equipment or rack
• Built for long-term use: Nylon braided jacket and twenty-four karat gold-plated connectors withstand over fifteen thousand bends without loss of flexibility or signal performance; backed by a three-year manufacturer warranty covering defects in materials and workmanship; also available in ten-foot and fifteen-foot lengths
• 3-YEAR WARRANTY AND MORE LENGTHS: 3-year manufacturer warranty covers defects in materials and workmanship; also available in 10ft and 15ft for larger studio rooms or live sound setups needing more reach between mixer, interface, and powered speaker

Especificaciones