Cargando el producto…
Precio de origen
$ 63.438
+ flete y aranceles — se calculan al cotizar
Compra protegida
Puerta a puerta
Aduana incluida
Product description Key Features Sharp blade Reinforced saw blade is made of premium steel, double-sided mechanical grinding. Ergonomic Design The handle is made of TPR plastic for a comfortable grip and save labor The saw blade angle is adjustable according to your need Cam pins The cam pins can be twist and lock with honeycomb base to secure work for accurate cuts. Easy to fix The vertical corner can be placed on the edge of the table for better control 1. MEASURE AND MARK THE CUT Measure the length of wood you need for your project. Mark it with a pencil, then draw a straight line across the board with a square.Mark the waste side with an “X” 2. PLACE THE WOOD IN THE MITER BOX Lay the wood inside the miter box.This particular miter box comes with peg clamps to hold the board tight against the back. Line up the waste side of the cut line with the side of the slot, not right down the middle! 3. LINE THE BLADE UP WITH YOUR MARK AND CUT Insert the saw into the slots for the angle you plan to cut. If you start sawing at full force, the blade will jump and you'll get a jagged edge at the top of the cut. Instead, run the blade lightly over the board a few times to score the surface and break those wood fibers. 4. FINISH THE CUT Once you have a groove in the board, you can finish the cut using more effort. Don't try to force the saw down. Just let the teeth do the work!
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
Los mejor puntuados del mismo tipo de producto
