Car Head Unit Wire Hareness for Toyọta Caṃry Corọlla RAV4̣ 4Ruṇner Tacọma, Fit Toyọta Car Stereo Radio Power Cable USB CANBUS Decoder Adapter Support J-B-L Amplifier SWC

Descripción

Product description Features: Harness is used when installing an aftermarket stereo, connects the aftermarket stereo.Harness to the vehicles factory harness, designed specifically to fit the compatible.Equipped with rich interfaces to fit your car.A Plug and Play, easy to install.Support J-B-L amplifier, original Steering Wheel Control, original USB.How to connect with your JBL adapter: If your car is equipped with JBL Amplifier, then connect the power cable at the wire/JBL harness tothe power jack of the Camry radio, and the protocol serial line and the factory USB cable should beconnected to the jack at the back of the Camry radio. The JBL Amplifier connector, the steeringwheel control connector, and the power cable connector at the other end should be connected to your car.As for other plug, If the connector fits the original connector from your Toyota car, then connect it,if not, please ignore it, and there is no need for you to connect themHow to Install the Backup Camera Please connect the power cable at the wire/JBL harness to the power jack of the Camry radio, and thenreverse video input connector is correctly plugged to the back port of radio, also the reverse control wire/ trigger wire is connected. These models above are just for reference, it can fit a lot other Toyọta models as well as long as your car connector is same, excluding Toyọta Tuṇdra and Toyọta Sequọia.This harness is for Toyọta high version with J-B-L Amplifier, and it does not support factory backup camera function. You need to install the backup camera that comes with our WOWiViD Camry radio.To avoid sound instability, please find the wire which labelled AMP CTRL at the wire harness, and then connect it to the ACC wire.It can fit android aftermarket radio with 16pin power socket. Please set the protocol according to the video in this listing after you connect the wire harness correctly to make your car stereo radio work.This wire harness is perfectly fit for WOWiViD Caṃry radio and there is no need for you to cut any wires. If you used it for Toyọta Car radio from other brands, then you may need to cut some wires.If you are not sure if it can fit for your car, please send us a picture of your original CD player's back connector picture to check for you! See More

Características

• Compatibility: For most Toyọta cars with J-B-L amplifier. Toyọta Caṃry Corọlla RẠV4 4Ruṇner C-ḤR Sienṇa Highlaṇder Prịus Prạdo Matrix Yarịs Veṇza Tacọma Sụpra and more, excluding Toyọta Tuṇdra and Toyọta Sequọia.
• Features: Support J-B-L amplifier, original Steering Wheel Control, original USB, factory radio adapter included, does not support factory rear camera. Different ports fit different Toyọta models.
• Easy Installation: This wire harness is perfectly fit for WOWiViD Caṃry radio and there is no need for you to cut any wires. If you used it for Toyọta Car radio from other brands, then you may need to cut some wires.
• Please Note: It can fit android aftermarket radio with 16pin power socket. Please set the protocol according to the video in this listing after you connect the wire harness correctly to make your car stereo work.
• To avoid sound instability, please find the wire which labelled AMP CTRL at the wire harness, and then connect it to the ACC wire.

Especificaciones