
Precio desde
$ 13.925
+ flete y aranceles — se calculan al cotizar
Color
Pantalla
Compra protegida
Puerta a puerta
Aduana incluida
Product description Anti Slip Tape Installation Steps 1.Cleaning Deep Cleaning: Use a strong cleaner (e.g., isopropyl alcohol or acetone) to remove all oil, moisture, and dust from the floor, ensuring it is completely dry and cool. 2.Environment & Tool Preparation Temperature: Ensure the floor and ambient temperature are between 10°C and 35°C during installation. Adhesion is poor if too cold and cures too quickly if too hot. Tools: Prepare a sharp utility tools, measuring tape, a heavy roller or rubber mallet, and newly purchased strong adhesive. 3. Pressure Application (Core Steps) During laying, always use the "peel-and-press" method, avoiding peeling off all the backing paper at once. Immediately after the tape is laid, use a rubber roller or mallet to apply repeated, firm pressure from the center to the edges, ensuring every inch, especially the edges, is adequately pressed. This is the most crucial step for activating the adhesive. 4.Curing & Post-Processing Adequate Curing: After installation, let it sit for at least 45 minutes and avoid any movement or stepping on it for 24 hours. Edge Sealing: For high-stress or moisture-prone areas like stair edges, apply a transparent waterproof sealant (e.g., silicone) along the tape edges 24 hours after curing to form a seal, which can greatly prevent moisture ingress and subsequent peeling. These instructions are provided as a general guide. Surface conditions and environmental factors may affect performance. Always test in a small area first.
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido