ckpsms Brand - 1SET #KP-123 Sewing Machine Double Fold Clean Finish Top & Bottom Binding Binder Attachment (Tape Size 2" =50MM)

Descripción

Product description Compatible with More Machines — Check Your Table Setup First The CKPSMS KP-123 Double Fold Clean Finish Binder Attachment is compatible with many single-needle lockstitch and industrial sewing machines when the machine table has two attachment mounting holes and enough space near the needle plate. Please confirm your machine table setup before purchase to ensure the binder can be securely installed and properly aligned. Compatible with many models, including but not limited to: JUKI DDL Series / Older & Common DDL Models: DDL-127, DDL-227, DDL-500, DDL-501, DDL-552, DDL-553, DDL-555, DDL-5550, DDL-5550N, DDL-8100, DDL-8300, DDL-8500, DDL-8700, DDL-8700-7, DDL-9000, DDL-9000A, DDL-9000B, DDL-9000C JUKI TL Series: TL-2000Qi, TL-2010Q, TL-15, TL-18QVP, TL-2020PE, TL-98E, TL-98P, TL-98Q, TL-98QE, TL-2300Q Brother DB2-B Series: DB2-B705, DB2-B706, DB2-B707, DB2-B710, DB2-B714, DB2-B715, DB2-B716, DB2-B730, DB2-B735, DB2-B736, DB2-B737, DB2-B738, DB2-B745, DB2-B746, DB2-B747, DB2-B748, DB2-B755, DB2-B757, DB2-B758, DB2-B767, DB2-B772, DB2-B774, DB2-B777, DB2-B778, DB2-B781, DB2-B790, DB2-B791, DB2-B792, DB2-B795 Bernina B Series: B330, B335, B530, B570, B580, B590, B740 Important Fit Note: Compatibility depends on the machine table, not just the machine model. Your table must have two mounting holes and adequate installation space near the needle plate for smooth operation. Multiple Tape Sizes Available — Choose by Inlet and Outlet Size Choose your binder by the tape size / inlet size — the width of the binding tape before it enters the binder. After folding, the finished size / outlet size is approximately 1/4 of the tape cut size. Tape Size / Finished Size Options: Inch Size Options: Choose by tape size / inlet size. Finished binding width is approx. 1/4 of tape size: 3/4” → 3/16”; 7/8” → 7/32”; 15/16” → 15/64”; 1” → 1/4”; 1-3/32” → 9/32”; 1-3/16” → 19/64”; 1-1/4” → 5/16”; 1-21/64” → 21/64”; 1-13/32” → 23/64”; 1-1/2” → 3/8”; 1-9/16” → 25/64”; 1-3/4” → 7/16”; 2” → 1/2”. Metric Size Options: Choose by tape size / inlet size. Finished binding width is approx. 1/4 of tape size: 20 mm → 5 mm; 22 mm → 5.5 mm; 24 mm → 6 mm; 26 mm → 6.5 mm; 28 mm → 7 mm; 30 mm → 7.5 mm; 32 mm → 8 mm; 34 mm → 8.5 mm; 36 mm → 9 mm; 38 mm → 9.5 mm; 40 mm → 10 mm; 45 mm → 11.25 mm; 50 mm → 12.5 mm. The CKPSMS KP-123 Double Fold Clean Finish Binder Attachment helps create a neat, even, and professional-looking double-fold edge for garments, straps, bags, quilts, patchwork, home décor, and other sewing projects Important Tips Before Use Machine table must have two mounting holesMake sure there is enough space near the needle plateFinished binding size is approx. 1/4 of tape cut sizeUse 45° bias-cut tape for curves and stretch fabricsUse tweezers or a small tool to help feed tape smoothlyAdjust binder position for better stitch alignment Always test on scrap fabric before final sewing Easy to Install with the Right Machine Table Setup The CKPSMS KP-123 Double Fold Clean Finish Binder Attachment is easy to install—simply position the binder and tighten the screws. Before purchase, please make sure your sewing machine table has two attachment mounting holes and enough space near the needle plate for proper installation and smooth operation. The rear tail guide helps lead the binding tape into the binder more smoothly, supporting cleaner feeding and a more consistent double-fold binding result. For best results, test on scrap fabric before sewing your final project. Adjustable Design for Smooth, Professional Binding The CKPSMS KP-123 Double Fold Clean Finish Binder Attachment features a fully adjustable design, allowing front/rear and left/right adjustment to match different sewing positions. The funnel-shaped opening and guiding slots help the fabric tape feed smoothly and evenly through the binder, reducing wrinkling, shifting, and uneven folding. It creates a clean double-fold edge for a neat, durable finish, making it ideal for fabrics, bias tape, clothing, bags, quilts, crafts, and more. See More

Características

• 1SET BINDER (Tape Size 2" =50MM).Important: please pay attention to the use scenes of this folder in the posted photo of this listing. There should be two screw holes to install this folder on the operation table. In case there is no screw holes or space on the operation table to install this folder, please do NOT buy this folder.
• We carry following binder tape (entrance )sizes:Tape Cut Size 3/4"=20MM;Tape Cut Size 7/8"=22MM;Tape Cut Size 15/16"=24MM;Tape Cut Size 1"=26MM;Tape Cut Size 1-3/32"=28MM;Tape Cut Size 1-3/16"=30MM;Tape Cut Size 1-1/4"=32MM;Tape Cut Size 1-21/64"=34MM;Tape Cut Size1-13/32"=36MM;Tape Cut Size 1-1/2"=38MM;Tape Cut Size 1-9/16"=40MM;Tape Cut Size 1-3/4" =45MM;Tape Cut Size 2" =50MM. Please select your size depending on your tape or binding size.The finish size is about 1/4 of the tape size！
• PLAIN RAW FINISH WIDE BINDER RIGHT ANGLE FOR SINGLE NEEDLE INDUSTRIAL SEWING MACHINE.
• This binder folds the tape in half around the fabric and makes RAW finish top and bottom. It is used to insert Tape, Braid, or Binding along the edge of the garment as shown in the diagram.
• This binder will Compatible with most industrial and home sewing machines with attachment mounting holes in the machine bed including, Bernina, Brother,Consew, Gemsy, Juki, Mitsubishi, Rex, Singer, SunStar, Tacsew, Yamata and many more.

Especificaciones