CNCTOPBAOS 3018-PRO CNC Router Engraving Machine w/GRBL Offline Controller

Descripción

Product description Package include: 1Set 3 Axis 3018-PRO CNC Router Engraving Milling Machine Kit1x GRBL 1.1f Control Board1x Offline hand controller1x 775 spindle motor1x ER11 Collet 3.175mm1x 24V DC 5A Power Supply10 x Tip 0.1 mm, 20° φ3.175 mm Drill Bits4x plate clamps1Set Allen Wrench2x ER Wrench1x Brush1x Spindle motor harness 60cm3x Stepper motor harness 60cm1x 4G USB flash drive include the english user manual & GRBL software CNC 3018-PRO w/ offline hand controller Dimensions: 42x35x27cm (16.53 x 13.78 x 10.63”)Stepper motor: Nema17 stepper motor 42x42x34mm,1.33A,0.3N.m,43oz-inMaximum stroke: 30x18x4.5cm (11.8 x 7.1 x 1.8”)System support: Windows XP SP3,Win 7,Win 8,Win 10 (32/64 can be);LinuxPower supply: 24V 5.6A power adapter (input voltage 110-240V)Chuck specification: ER11 3.175mm (Can be equipped with 0-7mm)Processing thickness: 4.5cm (1.8”)Material: PA6 Nylon + Aluminum profileControl system: grblcontrol,USB interfaceDrill bits: 10pcs tip 0.1mm 20 degree φ3.175mmOffline control: GRBL remote controllerProcessing accuracy: About 0.2mm GRBL controller board Connection: USB (USB-CH340)Software: GRBL controller, UniversalGcodeSenderInput voltage: 24VDCMaster chip: atmel 328P (arduino nano)Spindle drive chip: MOSFET (recommendation 24V, current : within 10ASpindle PWM speed: SupportSupport stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17/Nema23)Power Interface: 5.5-2.5mm DC interfaceSupport 3-pins module: support 0.5W-20W moduleSupporting file:G-code (.nc/.txt/.tape/.gcode) 775 Spindle Spindle parameters: 775 spindle motor (12-36V) 24V:10000r/minMounting hole diameter: M4 screw hole; Mounting hole pitch: about 29mm.Motor shaft diameter: 15mm; Motor diameter: 42mmDrill clamp parameters: ER11-3.175mm ( can be replaced 0-7mm )Control software: grbl control(candle)Supporting files: G-code (.nc/.txt/.tape/.gcode...)Processing accuracy: About 0.2mmMachinable material: Wood、 plastic、 PCB、 PVC、 carbon fiber、 acrylic、 density board etcPower: DC 24V 5.6A power adapter (input voltage 110-240VAC) GRBL offline control Support SD card and TF card at the same time, standard capacity 1G.With this offline controller module, you can directly control the CNC router without connecting it to your computer.After inserting the file into the SD card,the engraving file can be directly identified. You can also use the micro USB cable to connect the offline hand controller board to your computer and save the file directly.Manually control: manually adjust X,Y,Z axis location as engraving starting point,manually open or close spindle,manully open or close cooling fanFile engraving: after off-line controller save file, it can connect the GRBL control board and process engraving,no need to connect PC computerSave file: after the off-line controller connect PC,it will be recognized as USB,large capacity storage device, can access engraving file directly.SD shows it is SD card condition,turn on power supply after insert SD card,otherwise,it won't work.SD card capacity 4G could be recognized. Advantages Support oftware: GRBL controller,Candle, UniversalGcodeSenderAdd emergency stop button port,tool probe port and XYZ limit port.Power supply:24V DCThe spindle supports 0-100% adjustable PWM power.Support limit switch, tool setting, steering gear, cooling fan and other functions.Support PWM / TTL signal control, power 0-100% adjustable!Increase the power button switchCancel the drive module,integrate the imported stepper motor drive,no need to worry about module damage. And integrated heat dissipation aluminum alloy.Add offline recognition function, you can insert offline module and computer at the same time. The machine will automatically recognize whether it is controlled by the computer.Enhanced spindle drive.can support 20,000 rpm spindle.Add the fan port to force heat dissipation Compared with the old version grbl 1.1 Add the function of X/Y/Z axis limit switches,optimized the XYZ limit port and the port connected to the device,making wiring and operation easier.After installing the limit switch, when the XYZ axis moves beyond the travel of the engraving machine, the limit switch will trigger the machine to automatically stop the movement.Add the function of emergency stop button,this function can be used when an emergency stop is required at work, making our work safer and more efficient.Add the power button switch and move the power switch button from the bottom to the side,simple operation,more safety in the process of using the machine. Support two engraving methods The control board support two engraving methods,our package comes with a spindle motor but without the module in the picture above. Q&A Q: What materials can the milling cutter generally engrave or cut? A: Wood, acrylic (acrylic), pcb, pvb, soft metal, iron, glass, stone etc. Q: What thickness of wood or acrylic can generally be cut by module? A: 3-5mm wood board (acrylic), speed setting 10

Características

• Model: Upgrade Version 3018-PRO with Offline Controller; Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers; You can operate this machine without connect to the computer; offline controller included a SD card reader to write into the root directory G-code files or NC file; Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle
• Working area:300x180x45 mm / 11.8 x 7.1 x 1.8";Frame size: 420x350x270mm / 16.53x13.78x10.63"; Type: USB Port Desktop cnc router ; Spindle: 775 spindle motor 120W 12-36V,10000rpm/24V; Motor: Nema17 Stepper Motor 1.33A,42x42x34mm,0.3N.m,43 oz-in
• Upgraded GRBL1.1f Control Board: Added the outer casing,E-stop button port,tool setting probe port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support max 20000rpm spindle,and also can support 12V 3-PIN 0.5W-20W engraver module
• Main application: Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.and soft metal like copper and aluminum and other materials; Supporting files: G-code nc/txt/tape/gcode
• GRBL Software: Our parcel include 4G USB flash drive,pls download the installation instructions,user manual and GRBL software from the USB flash drive; System requirements: Windows XP SP3,Win 7,Win 8,Win 10 32/64 can be and Linux

Especificaciones