Dual Laser Measuring Tool 393Ft — Measure Both Directions at Once, Rechargeable Distance Meter with Angle Sensor & Level Bubble, 10 Modes for Construction and Home Renovation, IP54 Aluminum

Descripción

Product description COROLLATA Dual Laser Distance Measuring Tool — Measure Both Directions at Once COROLLATA dual laser distance meter fires two beams from both ends. One press = 3 results (left + right + total). No helper, no wall contact. 10 modes: bilateral, area, volume, Pythagorean height. Range 0.5–394ft bilateral. ±1/16in accuracy. USB-C rechargeable. THIS TOOL WAS BUILT FOR YOU CONTRACTORS & BUILDERS Alone on a 40,000 sq ft floor. One shot from center gives total width, left clearance, and right clearance — before you put your arm down. REAL ESTATE AGENTS Eight showings in a day. Point, shoot, show the buyer the number. No tape measure, no helper, no guessing room sizes. DIY RENOVATORS Tiling alone. Planning furniture alone. Area and volume calculated on-device — so your solo project stays accurate and on budget. TOOL UPGRADERS Your current laser reads decimals. Your blueprints are written in fractions. COROLLATA adds ft-in fraction display to 1/32" What ±1.5mm Means on the Job ±1.5mm Accuracy. Better Than Most. Built for the Job. ±1.5mm one-way · ±3mm bilateral. At 30 feet, within 1/8″. At 100 feet, within 3/16″. Covers walls, flooring, cabinetry, and trim. Switch to ft-in fraction mode: screen reads 8'10 21/32″ — the exact format used in construction drawings and material orders. For renovation work, this tool will not be your source of error. Previous page Switch Units — Including Ft-In Fractions Hold UNIT: cycle through m, ft, in, ft-in fractions. Screen shows 8'10 21/32" format. Turn Off the Beeping in 5 Seconds Hold FUNC+MEAS for 5 sec. Speaker icon confirms silent mode. Repeat to toggle. Press MEAS — That's It Press red MEAS once. Both lasers fire. Screen shows left, right, and total distance. Cycle Through 10 Measurement Modes Press FUNC to switch between 10 modes. Active mode icon appears at screen top. Scroll Back Through Your Measurements Press FUNC/RECORD to review saved readings. Scroll past measurements without re-measuring. Next page 1 HOLD UNIT 2 SILENT MODE 3 PRESS MEAS 4 PRESS FUNC 5 VIEW HISTORY Can I get readings in fractional inches like 12 ft 3 7/16 in? Yes. Hold UNIT 2 seconds to cycle: m -> ft -> in -> ft-in fractions. Displays exactly as written in construction drawings. No conversion needed. How do I turn off the beeping? Hold FUNC/RECORD and MEAS simultaneously for 5 full seconds. A crossed-out speaker icon confirms silent mode is active. Repeat the same action to re-enable sound. Works in any mode, any time. How do I switch between measuring both directions vs. just one direction? Press FUNC from the main screen. Double arrow icon means bilateral mode — both ends fire simultaneously. Single arrow means single-end mode. Press FUNC again to toggle. Is this accurate enough for tile work, flooring, or trim carpentry? Yes. At 30ft, readings are within 3/16 in of actual. Use ft-in fraction mode for finish carpentry. Not intended for surveying-grade applications. Does it work in dark rooms, attics, or basements? Yes. LCD has auto backlight for low-light conditions. Red laser visible across full range indoors. For outdoor use in bright sunlight, distances over 10ft give the most reliable readings. COROLLATA Dual Laser Distance Meter — Complete Technical Specifications Model TZCB120 Range 0.5–197ft one-way · 0.5–394ft bilateral Accuracy ±1.5mm one-way · ±3mm bilateral Units m / ft / in / ft-in fractions Modes 10 measurement + tilt + level Tilt | ±90° Display Backlit LCD · 3-line · auto-rotate · 100 memory slots Body CNC aluminum · matte dark charcoal Protection IP54 · 1.5m / 5ft drop-rated Magnetic 4-magnet back · hands-free on steel Battery 700mAh · 3.7V lithium · USB-C · ~3hr charge Battery Life ≥8,000 one-way · ≥5,000 bilateral Op. Temp 32°F to 104°F (0°C to 40°C) Storage Temp -4°F to 140°F (-20°C to 60°C) Size & Weight 115×50×23mm · 155g / 5.5oz

Características

• Measure from Anywhere in the Room — No Need to Walk to the Wall — This dual laser measuring tool fires from both ends simultaneously, returning 3 readings per press: left 196.60 ft, right 197.10 ft, and total up to 393.70 ft (120 m). Stand anywhere along the measurement line — center, corner, doorway — and capture wall-to-wall distance without touching either wall. ±1/16 inch accuracy in single-laser mode. Switch between bilateral and single-laser with one button. No helper, no guessing.
• Built-In ±90° Angle Sensor and Digital Level Bubble — The electronic tilt sensor reads slope in real time on the color display: measure stairway angles, roof pitch, or ramp incline directly on screen. The digital level bubble confirms horizontal alignment without a spirit level. Use continuous bilateral mode to walk along a room and watch readings change live — the display shows exactly when you reach the midpoint between two walls. One device replaces your tape, angle finder, and spirit level.
• 10 Measurement Modes Plus Angle and Level Functions — Length, area, volume, Pythagorean indirect height and width, continuous tracking, addition, subtraction, wall area, and auto tilt angle built in. Calculate square footage for flooring, estimate wall area for paint, or find ceiling height without a ladder. Reads in m / ft / in / ft-in fractions; 100 records saved automatically.
• 700 mAh USB-C Rechargeable Battery — Over 8,000 Measurements per Charge — The built-in 3.7 V lithium battery powers over 8,000 one-direction or over 5,000 bilateral measurements on a full charge via USB-C. A full charge takes about 3 hours. The large backlit color LCD auto-rotates and locks in 4 orientations — readable overhead, at waist level, or upside down, in bright sunlight or dark attics. Class II laser, 650 nm, < 1 mW. Auto laser-off 20 s; auto power-off 180 s.
• CNC Aluminum Body — IP54 Rated — Magnetic Back — The all-metal housing (155 g, 115 × 50 × 23 mm) survives 1.5 m drops and shrugs off construction dust and rain splashes. A strong rear magnet locks onto metal studs, steel beams, or pipe brackets — both hands free for marking or writing. Fits a tool-belt pocket or the included carry pouch. In the box: 1 × dual laser measuring tool, 1 × USB-C cable, 1 × carry pouch, 1 × user manual. CE / FCC / RoHS. Built for contractors, realtors, and designers.

Especificaciones