Cargando el producto…
Precio desde
$ 26.759
+ flete y aranceles — se calculan al cotizar
Opción 1
Color
Compra protegida
Puerta a puerta
Aduana incluida
Product description NOTES T0 BUY Please make sure that your home has a ground wire and that the ground wire is working properly.Can be used as single-pole control. Not suitable for 2 location & 3 way circuit.Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.Please not to connect the hot and load wires reversed. Please ensure that your needs and home environment are met with product installation requirements. INNOVATIVE PIR TECHNOLOGY The ELEGRP motion sensor switch uses passive infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. If the sensor detects human motion before the TIME delay elapses, the sensor will re-clock for another TIME setting cycle before it automatically turns off the loads. If the sensor switch is kept being triggered by human motions, it’ll keep the light on until time delay elapses and no human motion is being detected during this period, or manually switched off. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Provides an adjustable 120-degree field of view with optional adjustments for sensitivity.Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.Extremely low standby power consumption. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed. MULTIPLE SETTING MODES ———————————————————————————————————————————————————————————————————— Set It Into An Occupancy Sensor Switch - OCC Mode: Automatic ON & Automatic OFF Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.Set human body SENSOR sensitivity as desired.Set LIGHT sensitivity to “1”, “2” or "3" as desired. DO NOT set the LIGHT to " • ". The device will turn on the loads automatically when triggered by motion and turn off the loads automatically when the time delay elapses. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Set It Into A Vacancy Sensor Switch - VAC Mode: Manual ON & Automatic OFF Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.Set human body SENSOR sensitivity as desired.Set LIGHT sensitivity fully counterclockwise to " • " to disable automatic ON function. The device will turn on the loads manually only and turn off the loads automatically when the time delay elapses. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ———————————————————————————————————————————————————————————————————— 120° SENSOR COVERAGE Note: Please ensure there is no other huge furniture near the installation of the product, otherwise it will reduce the sensitivity of the induction.Install the sensor switch about 4 feet from the floor to get a better experience.Hot objects or moving air currents can affect the performance of the sensing switch.The sensing switch requires an unobstructed view of room occupants to detect motion.The inside LED indicator will flash when the sensor detects human motions. This motion sensor switch provides an adjustable 120-degree field of view with optional adjustments for sensitivity, ambient light override, and delayed off time. The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for the porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc. Important FAQ: 1. Q: Can the sensor switch be manually turned on/off to control the light? A: Yes. Manual operation is available under all settings. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2. Q: My house does not have the ground wire, can I use the neutral wire instead? A: No! This motion sensor switch requires an effective ground wire. Check your house before ordering. The neutral wire is not required to connect. We recommend another sensor switch in our store. It works without a ground wire, but a neutral wire is required. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 3. Q: I connected all the wires, including the ground wire, but it did not work. Is the switch faulty? A: There may be 2 reasons: 1): The Hot and Load wires are reversed. Please simply reverse the black and red wiring of the sensor switch, and try again. 2): The ground wire is not connected well or the ground wire is ineffective. Please consult a professional electrician. 3): After power-up, wait approximatel
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
