F405 Mini Stack, 20x20, 35A ESC, Bluetooth, APP Control | Built-in Bluetooth, 4-in-1 BLHeli_S ESC, Compatible with DJI Air Unit, FPV Drone Builds

Descripción

Product description Effortless Wireless Configuration with SpeedyBee App Say goodbye to the hassle of connecting USB cables to your flight controller. With the SpeedyBee app and Bluetooth connectivity, users can effortlessly configure UART Ports, PID settings, OSD preferences, and every parameter of the BLHeli_S ESC wirelessly. Robust 4-in-1 ESC Performance Experience stable and strong current output with our powerful Real 35A 4-in-1 ESC. Featuring a 6-layer 2oz PCB and optimized circuit design, coupled with Japanese TDK filtering SMT capacitors and onboard TVS protective diode, this ESC ensures seamless and reliable performance, even under rigorous conditions. Precise Gyroscope Power Supply for Smooth Flight Elevate your flying experience with our clean gyroscope power supply. Equipped with MaxLinear's LDO power supply chip and a 100uF ultra-large filtering tantalum capacitor, this setup provides independent power to the gyroscope, enhancing surge protection capacity by 320% and delivering precise responsiveness for every flight movement. Convenient Battery Status Indicator No more guessing about your battery level. Our flight controller features a built-in 4-level battery capacity indicator, allowing you to instantly check the battery status as soon as you connect the battery, saving you time and hassle. Wireless Motor Direction Adjustment Adjusting motor directions has never been easier. Simply connect to the SpeedyBee app and change motor directions wirelessly in just a few simple steps. Say goodbye to the need for a computer during setup. Versatile Support for DJI Digital Video Transmitters Our flight controller is designed to support various analog image transmissions above 5V, including DJI Digital Video Transmitters. With two independent 9V 3A BECs and a 5V 2A BEC, it provides reliable power for your DJI O3 Air Unit/Link/Vista/Air Unit V1. M2/M3 Compatibility for Hassle-Free Installation Ensure compatibility with your frame holes effortlessly. Our stack is perfectly compatible with both M2 and M3 screws, and it comes with two sets of screws and silicone grommets included in the package for added convenience. Enhanced ESC Protection for Peace of Mind Protect your ESC and ensure clean data transmission with our TVS protective diode and Rubycon 470uF Low-ESR capacitor. Absorb voltage spikes during battery plug-ins or crashes and maintain clean gyro data for an enjoyable flying experience. SpeedyBee F405 Mini Flight Controller MCU STM32F405 IMU (Gyro) ICM42688P USB Port Type Type-C OSD Chip AT7456E chip BLE Bluetooth Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available. Wireless FC Firmware Flashing NOT Supported. Please connect to the Betaflight configurator on the PC to do FC firmware update Wireless Blackbox Dwonload NOT Supported. Please connect to the Betaflight configurator on the PC to do blackbox analysis. WIFI Not supported DJI Air Unit Connection Way Direct soldering DJI Air Unit Compatibility Compatible with all DJI Air Units: DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1. Please use the solder pads < 9V, G, T1, R1, G, SUBS(R2) > on the front right corner of the flight controller to make a pin-to-pin connection with the solder pads on the DJI Air Unit. UART1 (T1, R1) is used for OSD and SUBS (R2) is used for DJI Air Unit’s internal SBUS receiver signal input. Blackbox 8MB Onboard Flash BetaFlight Camera Control Pad Yes (CC pad on the front side) Current Sensor Input Supported. For SpeedyBee BLS 35A V2 ESC, please set Scale=250 and Offset=-500. Power Input 3-6S LiPo. The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller. ESC Signal M1 - M4 wires or soldering pads on bottom side. UART 6 sets (UART1, UART2, UART3, UART4 (Dedicated for Bluetooth connection) ), UART5 (Dedicated for ESC telemetry), UART6 SpeedyBee 35A BLHeli_S Mini V2 4-in-1 ESC Firmware BLHeli_S J-H-40 Continuous Current 35A*4 Burst Current 45A (5 seconds) ESC Protocol DSHOT300/600 Power Input 3-6S LiPo Power Output VBAT (Battery voltage, used to power the flight controller) Current Sensor Support (Scale=250 Offset=-500) ESC Telemetry Not supported Mounting 20 x 20mm ∅3.5mm hole size, compatible with M2 and M3 screws/Silicone grommets. Dimension 1.38*1.38*0.22in/35*35*5.5mm Weight 0.016lb/7.2g

Características

• ADVANCED CHIP TECHNOLOGY FOR OPTIMAL PERFORMANCE: The SpeedyBee F405 MINI 35A flight controller boasts advanced chip technology, featuring a high-performance processor that delivers real-time response to flight commands. This ensures unparalleled flight stability and responsiveness, crucial for demanding flight configurations.
• ENHANCED USER EXPERIENCE WITH WIRELESS CONTROL: Equipped with a built-in Bluetooth module, users can adjust flight settings wirelessly via the SpeedyBee APP. This convenient feature maximizes drone performance while providing intuitive control, enhancing the flying experience.
• EFFICIENT MOTOR DRIVE FOR VERSATILE FLIGHT TASKS: The 35A all-in-one BLHeliS ESC board ensures efficient motor drive, making it suitable for a wide range of flight tasks, from compact 2-4 inch drones to ultra-light 5-inch models. This versatility allows users to tackle various aerial challenges with ease.
• COMPREHENSIVE FLIGHT MONITORING AND CONTROL FEATURES: The flight controller board is equipped with intuitive features such as 4-level battery level indicator lights and a built-in barometer. These features enable users to monitor battery levels accurately and maintain stable flight by precisely controlling altitude, ultimately enhancing safety and control during flight.
• FLEXIBLE COMPATIBILITY AND INSTALLATION OPTIONS: With dual BEC outputs providing power options of 5V 2A and 9V 3A, users have the flexibility to connect a wide range of FPV equipment, including analog image transmissions and DJI Air Unit setups. The M2/M3 dual compatibility design also ensures easy installation on various frame types, ensuring a seamless and stable fit without compromise.

Especificaciones