Gator Grip Traction Tape, Premium Grade Heavy Duty 36 Grit Anti-Slip Adhesive Tape, Indoor/Outdoor, Great for Stairs, Docks, Boats & Ramps, Black, 2 inch x 50 ft, SG6502B

Descripción

Product description INCOM Manufacturing Group provides a wide array of products including anti-slip tape, aisle marking tape, floor marking, reflective tape, barricade tape, pipe identification, safety signs and tags. INCOM has been manufacturing specialty adhesive tape and identification signage products for the safety and compliance markets since 1975. Gator Grip Heavy Duty 36-Grit Anti-Slip Tape Heavy foot traffic and dirty work environments can clog up standard grit products with mud, oil, sawdust, liquids, and grease. Our Extra Coarse Gator Grip offers a very deeply textured (36-grit) surface to continue to offer non-slip protection, even in the dirtiest conditions. The tape can even be spray painted over and still maintain an anti-slip surface. Gator Grip (36-grit) tape is water-proof for both indoor and outdoor applications and offers excellent hydrocarbon resistance. This tape has a very aggressive grit surface and is recommended for areas with heavy debris only. Great for mud, sawdust, snow, and other outdoor applications. Meets or exceeds OSHA 1910.24, 1910.26. Meets or exceeds ANSI A137.1/A326.3 (Dry & Wet) Dynamic Coefficient of Friction Test. AS/NZS 4586 Pendulum Test (Dry & Wet) Preparation / Installation Instructions Cleaning Preparation It is very important that the surface the tape is being adhered to is free from all debris such as dirt, dust, grease and oil. A combination of 50/50 alcohol and water solution is usually adequate for the cleaning process. The wiper/cloth should be changed frequently (white cloth recommended). Heavy accumulation may require more aggressive cleaning techniques. Temperature Temperature is a critical factor in adhesive bonding and is often over-looked. All our tape products are intended to be applied in temperatures of not less than 50ºF (10ºC). In general the closer to room temperature the better the bonding. Pressure (psi) Tape products should be smoothed down with 15 psi of pressure or more. This will aid adhesive 'wet out' and result in better bonding. Time Once the tape has been applied, the adhesive bond will continue to strengthen as it has time to cure. The ambient temperature will affect this bonding time (the colder the slower), but as a general rule good bonding will not be fully achieved for 24-48 hours after the application. Full bond strength will be reached at 72 hours (70ºF).

Características

• Our Extra Coarse Gator Grip offers a very deeply textured (36-grit) surface to continue to offer non-slip protection, even in the dirtiest conditions
• The tape can even be spray painted over and still maintain an anti-slip surface.
• Tape is water-proof for both indoor and outdoor applications.
• Best used for areas with heavy depris
• Meets or exceeds OSHA 1910.24, 1910.26 and ANSI B101.1.

Especificaciones