Grid Dividers compatible with Dewalt ToughSystem 2.0 Deep Internal Tray (DWST83408-1) - Yellow, 1 Set

Descripción

If you've ever tipped your ToughSystem tray upside down hunting for a specific size screw, you already know why these exist. These RuggedX Grid Dividers slot directly into the molding grooves inside your ToughSystem 2.0 Internal Tray and turn it into a 12-section parts organizer. The 11 dividers press into the existing grooves inside the tray - no tools, no fixings, no modification. They create a 12-section grid, with each compartment approximately 100mm x 80mm, across a total tray area of 400mm x 240mm - enough space to keep screws, bolts, drill bits, connectors and small accessories all separated and exactly where you left them. Remove or reposition any divider to merge sections when you need to fit something bigger. Works in the Deep Tray too These dividers also fit the ToughSystem 2.0 Deep Internal Tray (DWST83408-1). In the deep tray, the dividers fill the lower half of the depth only - leaving the upper half completely clear. That's actually useful: it gives you 12 sorted sections at the bottom, with open space above for flat items like circular saw blades or cable rolls to sit on top. If you're after full-depth dividers that use the entire height of the deep tray, take a look at the RuggedX Deep Tray Dividers. Perfect for: Machine screws, wood screws, wall anchors, drill bits, hex keys, router bits, cable connectors, small fittings - anything small enough to get lost at the bottom of an unsorted tray. Built to last Manufactured from heavy duty 3D printed PETG plastic - tough, lightweight, and built to handle daily job site use year after year. Designed and manufactured in the UK. Yellow. Pack includes: 3x Main Dividers, 4x Center Dividers, 2x Left Dividers, 2x Right Dividers (11 dividers total) | Yellow | Fits Dewalt ToughSystem 2.0 Shallow Internal Tray (DWST83407-1) and Deep Internal Tray (DWST83408-1) Please note: RuggedX Grid Dividers Compatible with Dewalt ToughSystem 2.0 Internal Trays (DWST83407-1 Shallow and DWST83408-1 Deep). When used in the Deep Tray (DWST83408-1), dividers occupy the lower half of the tray depth only. For full-depth organization in the deep tray, see RuggedX Deep Tray Dividers. TRAY NOT INCLUDED. We guarantee fitment - if you have any issues at all, get in touch and we will sort it immediately.

Características

• Finally - Every Screw, Fixing and Part Has Its Own Section - these dividers slot into the existing molding grooves inside your ToughSystem 2.0 Internal Tray and create 12 separate compartments, each approximately 100mm x 80mm. No more tipping the whole tray upside down to find the right size bolt
• Stop Losing Small Parts at the Bottom of the Tray - fixings, screws, drill bits, connectors - without dividers, they all end up in one corner every time you lift the box. These 12 sections keep everything where you put it, so you grab the right part first time
• Fits Both the Shallow and Deep ToughSystem 2.0 Internal Trays - designed for the Shallow Tray (DWST83407-1) but also fits the Deep Tray (DWST83408-1). In the deep tray, dividers fill the lower half only - leaving the upper half clear for flat items like circular saw blades. For full-depth organization in the deep tray, see the RuggedX Deep Tray Dividers
• Reconfigure the Grid to Suit the Job - remove or reposition dividers to merge sections and make room for longer or wider parts. 12 sections as standard, fewer if you need them. The layout is entirely down to you
• Slots In Without Tools - Built from Heavy Duty 3D Printed PETG - press the dividers into the existing molding grooves in the tray - no glue, no screws, nothing to drill. Each compartment approximately 100mm x 80mm. Pack of 11 dividers (3x Main, 4x Center, 2x Left, 2x Right). Yellow. TRAY NOT INCLUDED
• Designed and Made in the UK - Backed by 5★ Support - every RuggedX product is designed, tested and manufactured right here in Britain by a small UK business. Any fitment issues at all - get in touch and we'll sort it immediately

Especificaciones