Harmonic Balancer Puller Set For Ford GM Chrysler Vehicles

Descripción

Product description Easy Harmonic Damper Removal Use the Harmonic Damper Pulley Puller 6-Piece Set Harmonic Balancer Removal on compatible Vehicles when you need to remove the harmonic balancer on your vehicle. Wide Applications Compatible with Chrysler 1990- 3.3L V-6, 1993-1997 3.3L/3.5L V-6, 1994- 3.8L V-6, 1994- 8.0L V-10, 1995- 2.0L 4 Cyl, 2.4L 4 Cyl, and 2.5L V-6, 1998- 2.7L DOHC V-6, 3.2L SOHC V-6, and 3.5L SOHC V-6, 1998- 4.7L V-8;Compatible with Mitsubishi Eclipse 1995-1999 2.0L DOHC non-turbo;Compatible with GM 1997 Gen III 5.7L V-8 Camaro, Corvette, Firebird, Trans-AMCompatible with GM 2000- Gen III 4.8L/ 5.3L / 6.0L , 8.1L V-8;Compatible with Cadillac 1988-1992 4.5L V-8, 1991-1995 4.9L V-8, 1993- 4.6L V-8Compatible with Escalade 6.0L V-8;Compatible with Oldsmobile 1995- 4.0L V-8. Easy to Operate 1. Use a ratchet to remove the pulley center bolt after removing the drive belt from the pulley. 2. Select a top bar from the kit and insert this actuator into the three-pawl puller center bolt hole. Then lock the three jaws of the puller behind the pulley. NOTE: The length of the push rod must match the length of the puller jaws to engage the pulley! 3. Position the puller/pusher assembly onto the pulley. Ensure that the jaw puller is firmly engaged with the back of the pulley. 4. Using a 3/8" medium fly wrench or 19MM slowly rotate the center bolt to apply pressure to the top bar and the puller will slowly pull the pulley out. 5. Continue turning the extractor center bolt until the end of the extractor disengages. Reversible design to pull parts from the inside or outside Internal External 6-Piece Set for Harmonic Balancer Removal Various Applications 3/8” drive for use with ratchet and 3/4" drive for wrench or socket use, Compatible with Chrysler, GM, Mitsubishi, Cadillac, and Oldsmobile vehicles; Cars, SUVs, vans, and pickup trucks Built To Last Enhanced design with spring-loaded legs for optimal position retention; All steel construction for extra strength and longevity; Black oxide finish for corrosion resistance Easy Storage Heavy-duty 9” x 7” x 2” (23cm x 18cm x 5cm) blow-mold plastic carrying case with handle and latches for secure storage, easy transportation, and organization Exhaust Pipe Expander Tool Fumrtcy Truck Hub Seal Installer Kit Fumrtcy Pneumatic Fan Clutch Wrench Set Removal Tool Kit Engine Camshaft Alignment Timing Chain Tool Set Add to Cart Buying Options Buying Options Buying Options Customer Reviews 4.0 out of 5 stars 37 4.1 out of 5 stars 11 4.4 out of 5 stars 40 4.6 out of 5 stars 27 Price EUR 54.75EUR54.75 — no data — no data — no data Package 10 Pcs 5 PCS 8 Pcs 10 Pcs

Características

• Includes: Fumrtcy harmonic balancer puller set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use.
• Application: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks. Often without the need for removal of the radiator.
• Quality: Made of high quality steel, high hardness, not easy to break, the exterior is coated with black antioxidant layer, extended service life. Enhanced design with spring-loaded legs for optimal position retention.
• Storage: Heavy-duty blow-mold plastic carrying case with handle and latches for secure storage, easy transportation, and organization.
• WarmTips: If you try the 3-jaw puller is not fit you car, you need replace another puller. If you have any issues with the harmonic balancer puller set, please contact me.

Especificaciones