Módulo convertidor de frecuencia a voltaje, 0-10 Khz a 0-10 V F V Módulo convertidor analógico digital para conmutación de PLC y VFD Inversor PWM Tablero analógico digital de voltaje

Descripción

Specification:Output current: 5MAVoltage: 0-10VInput pulse level: 5V 12V 24VFrequency: 0 to 10KHZSize: Approx. 4.5 x 4.5cm / 1.77 x 1.77inchWeight: 18gQuantity: 1pcUse:Multi-circle potentiometer board is used to calibrate the correspondence of the frequency and voltage. Input supply voltage range of 12-30V DC.(The voltage of 15-24V is recommended) When the electricity level is 12V, the power supply voltage can NOT be 12V. It's better more than 15V. When the electricity level is 24V, the power supply voltage can be 24V. Signal inputs with optical coupling isolation. To ensure that the capability of anti-interfence. For use with PLC supported NPN type. Must have a ground wire. For with encoder requires constant speed of the encoder continuously rotate more than 0.5 seconds. Frequency/ Voltage converter module, the response time is about 0.3-0.5 seconds. If the signal input is turbine flow and so on, an 817 optical coupler and a resistor were needed to match the flow meter normally because of the signal match.Corresponding relationship:When the F / V with the resistance transferred to an intermediate value, F / v corresponding to the following relationship, 100HZ = 0.1V, accuracy is 1%. It can not reach to 2 digits after the decimal point if relatively high precision of the occasion is not enough.0.1V = 100HZ500HZ = 0.5V1KHZ = 1V2KHZ = 2V3KHZ = 3V4KHZ = 4V5KHZ = 5V6KHZ = 6V7KHZ = 7V8KHZ = 8V9KHZ = 9V10KHZ = 10VEach 0.1V DC of correspondence between the frequency 100HZ. When the correspondence if allowed, can be corrected to adjust to the board potentiometer.Package List:1 x Frequency to Voltage Converter

Características

• SPECIFICATIONS: This frequency to voltage converter module converts input signals with a range of 0 to 10kHz to analog voltage outputs of 0-10V and 5mA. It supports direct input without serial resistor at pulse levels of 5V, 12V, and 24V, requiring frequency maintenance over 0.5 seconds. Dimension are 4.5cm x 4.5cm, response time 0.3-0.5s. Output consistency relies on stable signal inputs
• TARGET USERS: Designed for PLC systems supporting NPN type configurations, this frequency to voltage converter module is ideal for encoders that need constant speed rotation beyond 0.5 seconds and sensors applications
• FUNCTIONALITY: This frequency to voltage converter module transforms frequency signals into analog voltage using optical coupling isolation. Conversion is straightforward, facilitating easy wiring and setup in various signal conversion scenarios
• COMPATIBILITY NOTES: Operation of this frequency to voltage converter module necessitates a ground wire connection and compatibility with specific PLC model. Additional components may be required for certain signals
• POWER REQUIREMENTS: This module requires a DC input supply voltage range of 12-30V, with 15-24V recommended for optimal performance. Power supply should exceed 15V for 12V input levels; for 24V inputs, 24V is sufficient, ensuring stable conversion without overloading

Especificaciones