Cargando el producto…
Precio de origen
$ 9.666
+ flete y aranceles — se calculan al cotizar
Compra protegida
Puerta a puerta
Aduana incluida
STOP - Read This Before PurchasingCritical Installation Note: Many older Orbit 100-series valves used a separate adapter piece between the solenoid and valve bonnet. When you remove your old solenoid, look carefully at what came out. If you see ribs or a collar above the threads, you removed an adapter along with the solenoid. Thread that adapter back onto teh new solenoid or valve bonnet (hand-tight) BEFORE installing this new solenoid. Skipping this step will cause leaks or fit issues.Compatibility Check:Works with: Orbit jar-top valves, 100-series valves, most standard 3/4"-20 UNEF threaded valvesDoes NOT work with: L-Series valves (order 57226 instead), DV-series, PEB-series (without separate adapters)Replacing an old metal-plunger solenoid? Remove any rubber O-ring inside the valve threads. The new internal plunger design doesn't need it - leaving it in can prevent proper shutoff.What's included: One 24V solenoid with waterproof housing, stainless steel internals, and insulated wires. Operates reliably from 20-28V AC. Replaces discontinued model 57039.Installation steps:Turn off waterDisconnect wires from old solenoidUnscrew old solenoid - check if an adapter came with itIf adapter present, thread it back onto valve bonnet firstRemove any old O-rings from threads (optional)Hand-tighten new solenoid into placeConnect wires with waterproof wire nutsTurn water back on and testFor outdoor irrigation use with cold water only.
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
