Prettyia Power Steering Pump Pulley Removal Tool，Pulley Removal Tool

Descripción

Product description 1. Choose the appropriate pulley puller: Based on the size and shape of the pulley to be disassembled, select a puller tool that matches the size and structure.2. Install the claw of the puller: Install the claw of the puller at the edge of the pulley or at an appropriate disassembly position to ensure that the claw can firmly grasp the pulley.3. Adjust the center screw: make the tip of the center screw press against the center position of the shaft to ensure that the tension is evenly applied to the pulley.4. Tighten the screw: Use a wrench or other suitable tool to gradually tighten the central screw, causing the claws of the puller to gradually pull outward, thereby generating tension to pull the pulley out of the shaft.5. Uniform force application: During the process of tightening the screw, it is necessary to maintain uniform force application to avoid excessive force on one side, which may cause damage to the components or failure of the puller.6. Check the dismantling progress: Regularly check the dismantling progress of the pulley to ensure smooth operation.7. Complete disassembly: After the pulley is completely removed from the shaft, stop tightening the screw and carefully remove the puller and the disassembled pulley.It should be noted that when using the pulley puller, the quality and strength of the tool should be sufficient, and safety regulations should be followed during operation to prevent accidents. 1. Choose a suitable puller and install the puller claw in the appropriate position on the pulley. 2. Adjust the center screw to the center of the shaft. 3. Tighten the screw evenly to pull the pulley outward with the claw. 4. Check the progress until the pulley is completely removed.

Características

• pulley removal tool：Save Labour crankshaft pulley removal tool and crank pulley removal tool，alternator pulley removal tool Easy to use，pulley puller tool Suitable for most repairs extractor de poleas、honda crank pulley tool
• pulley puller：pulley puller tool kit and tensioner pulley tool ，Adjustable Crankshaft Pulley Removal Tool，Be suitable for Power Steering Pump Pulley Removal Tool，We have a wide range of internal corner wrenches，All running alternatorsbearing disassembly It's easy to do
• Scalable design：pulley puller tool Shorten the minimum pitch 40mm/1.6inch, lengthen the maximum pitch 165mm/6.5inch, It weighs about 3 pounds can be used in most engine bays, This worked really well on A/C compressor pulley even though it is designed more for other ribbed pulleys，It has a large notch that works on the rim of the A/C pulley
• crank pulley removal tool：pulley removal tool Fit perfectly into the grooves, severely rusted and stuck crank pulley on OLD, can be coated with lubricant and removed using the Prettyia pulley puller tool Includes wrench kit, hum easy to complete various disassembly
• Products include: crank pulley removal tool 1piece、pulley Wrench 1piece17mm sleeve, inner corner wrench 1piece、12 months warranty pulley removal tool, You received a total of 3 kits can be purchased directly ours pulley removal tool

Especificaciones