Probador de sistemas de riego, localizador de válvulas de aspersores 4 en 1 y rastreador de cables con activador de solenoide, sonda de audio, prueba de reloj, indicadores LED, linterna, recargable tipo C

Descripción

Product description The Zuomeng Irrigation System Tester includes a main control unit and an audio probe. The main unit offers four detection modes with clear LED indicators, while the handheld probe delivers precise audio tracking with adjustable volume and a built-in flashlight. Together, they simplify valve locating, wire tracing, and system troubleshooting. Chatter mode Switch to chatter mode and activate the solenoid valve to cycle open and close approximately once per second, producing a periodic "click" sound that tracks the location of the valve. Solenoid activate mode It can detect the solenoid valves at the clock and valve positions, and connect two test lines with black clips to the station line and common line of the solenoid valves respectively. Switch to solenoid activate mode, detect that the solenoid valve is activated normally, and the Good LED green indicator light is always on; Detected that the solenoid valve coil is disconnected or the circuit is not connected, and the blue indicator light of the Open LED is always on; A short circuit has been detected in the solenoid valve coil, and the red indicator light of the Short LED is constantly on. Send tone mode To identify a single wire from a bundle of similar wires, attach one lead to the station wire and the other lead to the common. Switch to Send tone mode, and the green LED indicator light will continue to light up. Use the tone probe to track the strongest signal point along the cable, and the tone at that signal point will receive the strongest signal. Clock test mode With the clock on and turned to the station under test, switch to Clock test mode. Attach one lead to the station wire and the other lead to the common. If normal voltage/current is detected, the blue LED indicator light will remain on. If it cannot be detected, the indicator light will continue to flash. Reliable Power with Type-C Charging The main unit is powered by a 2000mAh rechargeable lithium battery and supports Type-C charging. The audio probe requires two batteries.

Características

• Fast and Accurate Irrigation System Diagnostics: Quickly locate and troubleshoot underground sprinkler system issues with built-in solenoid activation and wire identification functions. Bright LED indicators clearly display voltage, solenoid status, and battery level, reducing repeated testing and improving overall efficiency
• Four Precise Testing Modes: Chatter Mode uses a rhythmic audible signal to help locate buried valves; Solenoid Activation Mode checks whether the valve coil is operating properly; Audio Tracing Mode accurately identifies target wires; and Clock Testing Mode detects the presence of voltage and current at the solenoid. These versatile functions help reduce troubleshooting time, labor, and maintenance costs
• Powerful Audio Probe: The included audio probe features five adjustable volume levels and detects the clear pulsing signal generated in Chatter Mode, helping you accurately locate valves and wires. It also supports headphone use for improved detection in noisy environments. Headphones are not included
• Thoughtful, Jobsite-Ready Design: The specially designed piercing clips are non-polarized and can test insulated wires directly without stripping the insulation. A built-in flashlight provides added visibility in thick grass, soil, and other low-light working conditions, helping improve accuracy and efficiency
• Portable and Easy to Use: Equipped with a built-in 2000mAh rechargeable lithium battery and a Type-C charging port for convenient recharging and dependable runtime. Ideal for underground sprinkler systems, cable tracing, and control wire troubleshooting, making it a practical tool for irrigation technicians, landscapers, and maintenance professionals

Especificaciones