Rastreador de cables y probador de circuitos - Generador de tonos y kit de sonda - Encuentre y rastree alambres y cables, pruebe la continuidad del circuito, línea telefónica de red, coaxial, automotriz - Incluye pinzas de cocodrilo y enchufe RJ11

Descripción

Product description PTE aim at delivering the best value products at an affordable tag for both amateurs and professionals handyman and handywoman. With this in mind, our brand focus on bringing tools which make good on their promises and deliver good performances without burning a hole in your pocket. Broken Circuits Have Nowhere To Hide Thanks to PTE Wire Tracer, you can trace wires in a range of applications including buried wires, single strand, broken wires, etc. and verify the continuity of your installation. Kit includes PTE Wire Tracer Probe and Transmitter with RJ11 phone connector and a pair of alligator clips. Note: Two 9V batteries required. Batteries are not included. FIND WIRES QUICKLY AND ACCURATELY - Detect and trace wires from source to termination. (Use only on Alligator clip in Tone Mode). FLEXIBLE USAGE - Thanks to the CONT mode you can check for short and open circuits, and the RJ11 connector lets you test telephone ADJUSTABLE - Adjustable sensitivity for differentiating wires in close proximity and avoid false detection NO RISK - One-year coverage and friendly service from seller TrueToSource! Signal Detector Non-contact probe audibly identifies selected wire or cable. Rotate the volume/sensitivity control on the probe for the appropriate level and sensitivity to identify and trace the wire. Signal Sender Switch to Tone Mode and use only one alligator clip to Trace Wire. Switch to Continuity Mode and use both alligator clips to check for continuity and short circuit. Alligator Clips In Tone mode connect the red clip to the Wire you wish to trace and the black clip to ground if possible. In Continuity mode connect each clip to each end of the circuit cable. If the wire is short circuited or broken the Red LED with light. You can then use Tone mode to trace the wire all the way to the break location. RJ-11 Plug Use the RJ-11 plug to identify ring and tip telephone line and test the line condition (clear, busy, ringing). Instruction

Características

• FIND WIRES QUICKLY AND ACCURATELY - Detect wires in a range of applications including buried wires, single strand, broken wires, etc. Not meant for live electrical wires. Suitable for Electrical wires, Landlines, Coaxial cables, Automotive cables etc...
• MAXIMIZE TRACING ACCURACY - Wall thickness and material can affect signal transmission. While the Tone signal can track cables through ceilings, floors, and walls, performance may vary. (IMPORTANT: For best results, use only one alligator clip in Tone Mode.)
• DETECTS SHORT/OPEN CIRCUIT/ TELEPHONE LINE - Thanks to the CONT mode, you can check for short and open circuits, and the RJ11 connector lets you test telephone systems easily (Use both Alligator clips in Continued Mode)
• ADJUSTABLE SENSITIVITY - The variable sensitivity dial allows you to identify a single wire when multiple wires are routed in close proximity, ensuring precision and safety while avoiding false detection
• ONE-YEAR WARRANTY - Should you experience any issues with the product, please refer to the instructions below or contact the seller, TrueToSource, via Amazon messaging for troubleshooting assistance or to request a replacement.

Especificaciones