Rockville RKL80MB 8" Black Wakeboard Tower Speakers 4-Pack with DBM45 Amp | Beat-Sync LED, IP66, 2000W Peak / 500W RMS, 4-Channel, 4 MAC80B Pod Enclosures, RMWK4 Amp Wire Kit, Marine Boat, 10-items

Descripción

Product description (4) Rockville RKL80MB 8" Marine Boat Wakeboard Tower Speakers w/LED's+Amplifier Package Includes: (2) Pairs of Rockville RKL80MB 8" 900 Watt Black 2-Way Marine Boat Speakers w/LED's(1) Rockville DBM45 4-Channel 2000w Peak/500w Dyno-Certified RMS Marine/Boat Amplifier(1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit(2) Pairs of Rockville MAC80B 7.7” Black Aluminum Wakeboard Tower Speaker Pod Enclosures Features of RKL80MB: Pair Rockville RKL80MB 8” 2-Way 900 Watt Black Marine Boat Speakers with LED LightsPower Rating: 450 Watts Peak / 100 Watts RMS Per SpeakerTotal Power Per Pair: 900 Watts Peak / 200 Watts RMSBeat sync LED’s flash to the rhythm of the musicYou can select either red or blue color LED’s on the wire harnessNo extra installation for the LED. It gets a power signal through your speaker wireThe louder the music the more intense the LED’s flashIP66 waterproof ratingFully Marinized Against Salt & Fresh Water ConditionsUV treated cone makes this completely Waterproof and rustproofAnti-corrosion Stainless Steel TerminalsMolded ABS plastic for amazing sound and protection from the elements while out on the waterPolypropylene Formed Cone22 Oz Y30 magnet supports high power handlingRubber SurroundHigh quality ferrite magnet1” inch PEI Tweeter8” Woofer with Oversized 1.2” CCAW Kapton Voice CoilPre-installed Stainless-Steel mounting screws includedPerfect for Marine, Car, ATV and UTV applicationsImpedance: 4-OhmFrequency Response: 40Hz - 20KHzSound Pressure Level: 89dB @ 1w/1mTotal Diameter: 8.07”Cutout Diameter: 6.89”Total Height: 4.84”Mounting Depth: 3.54”Perfect for marine, ATV, outdoor use Features of MAC80B: Pair of Rockville MAC80B black aluminum can wakeboard tower enclosuresMade of high quality 6061 aircraft grade aluminumBeautiful black powder-coat finish100% waterproof and fully marinized against salt and fresh water conditionsInternally wired for clean install—no exposed wires or terminalsHigh efficiency design features the perfect airspace for 7.7” speakersRugged universal mounting clamps made of 6061 aluminumIncludes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameterMounting Depth - 7.4"Total Depth - 9.5"Cutout - 6.95"Diameter - 7.95".Mounting diameter - 7.47"Height of mount - 3.75"Total height of unit - 11.5" Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable25’ Blue Remote Wire(1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring(1) 120A Mini-ANL Fuse(1) 80A Mini-ANL Fuse(2) Ring Terminals(2) Spade Terminals(5) Speaker Cable Terminals(1) Washer(10) White Cable Ties Features of DBM45: Rockville DBM45 4-Channel 2000w Peak/500w Dyno-Certified RMS Marine/Boat AmplifierDyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)2 Ohm: 125 Watts x 4 Channel4 Ohm: 85 Watts x 4 Channel4 Ohm Bridged: 250 Watts x 2 ChannelPeak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)2 Ohm: 500 Watts x 4 Channel4 Ohm: 340 Watts x 4 Channel4 Ohm Bridged: 1000 Watts x 2 ChannelPainted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)Waterproof silicone covers for end panelsRustproof Aluminum heat sink with white painted finish, Stainless steel end panels are rustproofAll screws and mounting hardware are stainless steel and rustproof, Bottom panel is aluminum and rustproofAll channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakersAll channels on the amplifier are bridgeableFully Adjustable 12dB / Octave Crossover with Differential CircuitryAdjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob), Adjustable Low Pass Filter: 40Hz – 4KHzAdjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter)Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter)Fully Adjustable 12dB Bass Equalizer, 2CH/4CH Input Mode SwitchStatus Mode LED Indicator, Adjustable Input Level ControlMute and Delay Soft Start System, Minimum THD at Rated Power: <0.05%S/N Ratio: >90 dB, Frequency Response: 10 Hz - 50 kHzDamping Factor: >85 @ 100Hz, (2) 35 Amp ATC FusesHigh-Speed MOSFET Power Supply, Studio-Grade Bipolar Output Stage Transistors8 Volt Preamp Circuitry, 35 Amp x2 ATC FuseMicrophone input and PA microphone includedProduct Dimensions (W x H x L): 9" x 2.4" x 15.1"Product Weight:

Características

• Package Includes: (2) Pairs of Rockville RKL80MB 8" 900 Watt Black 2-Way Marine Boat Speakers with LEDs, (1) Rockville DBM45 4-Channel 2000W Peak/500W Dyno-Certified RMS Marine/Boat Amplifier, (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit, (2) Pairs of Rockville MAC80B 7.7" Black Aluminum Wakeboard Tower Speaker Pod Enclosures
• Amplifier-Ready Marine Performance: Power your tower and cabin zones with the DBM45's Dyno-Certified output (85W x4 @ 4-Ohm, 125W x4 @ 2-Ohm, or 250W x2 bridged @ 4-Ohm), wide 10 Hz-50 kHz response, and fully adjustable 12 dB crossovers (HPF/LPF/Band-Pass/Subsonic). Marine-grade construction includes conformal-coated PCB, silicone terminal covers, aluminum heat sink, and stainless hardware for reliable performance in harsh salt or fresh water.
• Waterproof Speakers With Beat-Sync LEDs: Each RKL80MB 8" 2-way speaker is IP66 rated and fully marinized with UV-treated polypropylene cone, molded ABS basket, rubber surround, stainless terminals, and a 22-oz Y30 magnet. An oversized 1.2" CCAW Kapton voice coil and 1" PEI tweeter deliver clear 40 Hz-20 kHz playback at 4-Ohm (89 dB sensitivity). Built-in LEDs flash to music; select red or blue on the harness-no separate LED wiring required. Total diameter: 8.07", mounting depth: 3.54".
• Aluminum Tower Enclosures For 7.7" Drivers: MAC80B pods use aircraft-grade 6061 aluminum with a black powder-coat finish for corrosion resistance and a clean, pro look. They're 100% waterproof and internally wired-no exposed terminals. Universal clamps fit 2"-2.5" towers with precision rubber inserts; optimized internal airspace boosts efficiency for louder, cleaner sound. Includes all mounting hardware for fast, secure installation on most wakeboard towers.
• Complete Marine Wiring Kit Included: The RMWK4 kit simplifies a clean, durable install with 4-AWG marine-ready power/ground, 20' twisted-pair tinned-OFC RCA, 25' flat tinned-CCA speaker cable, 25' remote wire, Mini-ANL waterproof fuse holder (120A/80A fuses), ring/spade terminals, and cable ties. Chemical-resistant jackets and corrosion-safe terminations are designed for battery compartments and bilge environments to maintain low impedance and dependable current delivery.

Especificaciones