Sony Aftermarket Radio Install kit (Compatible with Toyota and Subaru) - Direct Wiring Harness for aftermarket Stereo Compatible with 4runner, Sienna, Tacoma, Tundra, BRZ, WRX, and Impreza

Descripción

Product description AHH-70-1761SO Installation Diagram Get Ready for the Cleanest/Simplest Audio Install that You've ever done! The Sony connector is pre-wired to the Metra 70-1761 style connectors compatible with your Subaru or Toyota. All you need to do is plug it in! You will also need to connect the Reverse, Vehicle Speed, and E-brake signals if you need these features. If you're using an AutoHarnessHouse.com 28-pin (or 20-pin) adapter, the install will be completely Plug and Play! Just plug in the 28-pin (or 20-pin) wiring adapter using the interface connector! Details Only Compatible with Sony models (See Compatibility List below)Connect your Sony Radio headunit directly to your Vehicle with minimal wire soldering/crimping and without damaging factory wire!We use only high quality, large diameter wire and connectors. You will not be disappointed.Reverse, Vehicle Speed, and E-brake signals are provided from the Sony connector. +12v switched (Red) and Ground (Black) connections are also provided for connection of a steering wheel control interface or other +12v device.6-pin interface connector can be used to directly connect to the AutoHarnessHouse.com 28-pin adapter. (Fully Plug and Play Installation) If you will not be using the 28-pin adapter, just cut off this connector and do wiring as needed.Instructions Included Vehicle Compatibility Information - Please make sure that BOTH your Vehicle and Sony Headunit are listed! Subaru 2013-2020 BRZ 2012-2014 Crosstrek XV (w/ nav) 2015-2020 Crosstrek (both nav and non-nav models - Not Harman Kardon) 2012-2015 Forester (w/ nav) 2016-2020 Forester (both nav and non-nav models - Not Harman Kardon) 2012-2014 Impreza (w/ nav) 2015-2020 Impreza (both nav and non-nav models - Not Harman Kardon) 2012-2014 Legacy (w/ nav) 2015-2020 Legacy (both nav and non-nav models - Not Harman Kardon) 2012-2014 Outback (w/ nav) 2015-2020 Outback (both nav and non-nav models - Not Harman Kardon) 2012-2015 WRX and WRX STI (w/ nav) 2016-2020 WRX (both nav and non-nav models - Not Harman Kardon) Toyota 1994-2018 All Models (except models with JBL audio) ***This Adapter does NOT fit Lexus models.*** Sony Headunit Compatibility Information CDX-G1200U, CDX-G1201U, CDX-G1202U, CXS-G124SU, CXS-G1216U, CXS-G1269U, CDX-G3200UV DSX-A110U, DSX-A110UW, DSX-A410BT, DSX-A415BT, DSX-A416BT, DSX-B700, DSX-GS80, DSX-GS900 MEX-BT4100P, MEX-N4200BT, MEX-N4300BT, MEX-N5300BT, MEX-N7300BD XAV-1500, XAV-3500, XAV-9500ES XAV-AX1000, XAV-AX3000, XAV-AX3200, XAV-AX4000, XAV-AX5000, XAV-AX5500, XAV-AV5600, XAV-AX7000, XAV-AX8000, XAV-AX8100 and MANY more... See More

Características

• Connect your Sony Radio headunit directly to your Vehicle with minimal wire soldering/crimping (Metra 70-1761 type connectors are prewired to the Sony connector)
• Reverse and E-brake signals are provided from the Pioneer connector. +12v switched (Red) and Ground (Black) connections are also provided for connection of a steering wheel control interface or other +12v device.
• Compatible with all Non-JBL Toyota and Scion models 1987-2017. Does not fit JBL cars.
• Compatible with 2016+ Subaru models (as well as all BRZs)
• Only fits Sony Headunits

Especificaciones