Válvula Solenoide Eléctrica de Latón Macizo de 1/2 pulg., CC 12 V, Normalmente Cerrada, Sello FKM, 4,8 Cv, Semidirecta, para Aire, Gas, Combustible y Aceite

Descripción

Product description The U.S. Solid electric solenoid valve features a durable brass body, suitable for outdoor but not underwater use. It's favored by customers for DIY projects, moderate temperature and chemical applications, as well as for controlling flow in irrigation, reverse osmosis, and motorcycle systems. Direction of the Flow Most U.S. Solid Valves are UNIDIRECTIONAL Make a note of the arrow on your valve. Most U.S. Solid valves are unidirectional. This means they are intended to flow in one direction only, in the direction of the arrow. If connected in opposite directions, the valve will not actuate properly (will not close for Normally Closed valves). Additionally, be sure the medium passing through is filtered. If not, particles will cling to the gasket over time, which can cause it to not seal properly. Specifications Model USS2-00012 Size 1/2" Flow Aperture 16 mm Body Material Brass Gasket / Diaphragm / Seal VITON Rated Voltage DC 12V Current 0.875 A Power 20 W Operation Type Semi-direct Operation Mode Normally Closed Operational Pressure Range Air/Water: 0-7Bar Oil:0-5Bar Flow Capacity 4.8 gallons per minute (GPM) of water at 60℉ with a pressure drop of 1 PSI Flow Value 4.8 Cv Operational Temperature 14 ℉ to 248 ℉ Applications diesel fuel, kerosine, alcohol etc. Applicable Liquid Viscosity < 20 cst THREADING U.S. Solid Valves follow National Standards for pipe thread. We suggest the use of Teflon tape to ensure the seal of the NPT threading. The tapered male and female thread form angled surfaces that with increased torque squeeze the Teflon tape resulting in a tight seal. About Filter Installation To avoid valve issues like leakage or jamming, make sure to install a filter if the water contains particles. If the valve can't fully open or close, it may be clogged with impurities. In this case, open the valve and clean the internal components. 1/2" Electric Solenoid Valve USS2-00012 Add to Cart USS2-00008 Add to Cart USS2-00069 Add to Cart USS2-00072 Add to Cart USS2-00080 Add to Cart Customer Reviews 4.4 out of 5 stars 1,910 4.4 out of 5 stars 73 4.4 out of 5 stars 315 3.8 out of 5 stars 93 4.4 out of 5 stars 39 Price $32.55$32.55 $44.09$44.09 $48.73$48.73 $47.81$47.81 $45.49$45.49 Material Brass Brass Stainless Steel Stainless Steel Brass Voltage AC 12V DC 12V DC 12V DC 24V AC 110V Power 21 VA 12W 20 W 20 W 22.8 VA Operation Type Direct Pilot Semi-direct Semi-direct Semi-direct Normally Closed ✔ ✔ ✔ ✔ ✘

Características

• RESPUESTA RÁPIDA, SE ABRE DESDE 0 BAR: Un diseño semidirecto se abre desde 0 bar sin diferencia de presión mínima y se abre o cierra en menos de 1 segundo cuando se activa o desactiva, clasificado para más de 1 millón de ciclos.
• LATÓN INDUSTRIAL, PARA GAS COMBUSTIBLE Y ACEITE: Un cuerpo de latón resistente a la corrosión se adapta a gasolina, diesel, queroseno, gas natural, aire y aceites; Debido a que el latón contiene plomo, no lo use para agua potable.
• SELLO FKM PARA CALOR Y COMBUSTIBLE: El sello FKM (fluoroelastómero) resiste altas temperaturas y productos químicos, combustibles, aceites y lubricantes corrosivos por encima de -10 a 120 °C (14 a 248 °F), donde los sellos NBR o EPDM se hincharían.
• NORMALMENTE CERRADO, NO SERVICIO CONTINUO: Un resorte interno lo mantiene cerrado sin energía; Energice la bobina de 12 V CC (20 W) para abrir. No es una válvula de servicio continuo, por lo tanto, limite la activación a 8 horas por ciclo para proteger la bobina.
• PARA RIEGO, RO Y MÁS: Controla el flujo para manejo de combustible y gas, riego, ósmosis inversa, elaboración de cerveza casera y proyectos de bricolaje, pasando 4,8 Cv a través de un orificio de 16 mm, con clasificación IP65.

Especificaciones