2X 6dBi Antena WiFi de Doble Banda RP-TNC Macho 2.4GHz/5GHz Omnidireccional para Linksys Router WRT54G WRT54GL WRT54GS WAP54G, Cisco Aironet, Estación Total Trimble, Punto de Acceso Inalámbrico, IoT Industrial

Descripción

Product description Are you tired of weak WiFi signals, dropped connections, and limited range on your Linksys router or Cisco access point? The 2-Pack 6dBi Dual Band RP-TNC Antenna Set is engineered to dramatically improve your wireless coverage. Upgrade from standard 2-3dBi stock antennas to 6dBi and experience extended range, stronger signal through walls, and more reliable connections throughout your home or office. Linksys and Cisco use RP-TNC (Reverse Polarity TNC) as the standard antenna connector for most of their wireless products. Unlike RP-SMA connectors commonly found on other brands, RP-TNC is thicker and features a more robust threaded design with a pinless male connector. Our antennas are designed to be a direct replacement for your original equipment—no adapters, no modifications, just plug and play. Frequency Range 2.4GHz: 2400-2500 MHz / 5GHz: 4900-5850 MHz Gain 6 dBi Connector Type RP-TNC Male (internal threads, pinless design) Radiation Pattern Omnidirectional (360° horizontal) VSWR ≤ 1.5 Impedance 50 Ohms Polarization Vertical Hinge Type 180° tilt-and-swivel Operating Temp -20°C to +80°C This antenna set works with virtually any device equipped with RP-TNC female ports: Linksys Wireless Routers & Access Points: WRT54G, WRT54GL, WRT54GS, WRT54G-TMWAP11, WAP54G, WRT160NLWRT1900AC, WRT1200AC, WRT3200ACME series routers (E1200, E2500, E3200, etc.)BEFW11S4, BEFW11P1 Cisco Aironet Access Points: Aironet 340, 350, 1200, 1310 seriesAironet 2700, 2800, 3700 seriesAIR-ANT2524DW-R, AIR-ANT5135DB-R, AIR-ANT5135DW-RAIR-ANT5160V-R, AIR-ANT2566P4W-R Trimble & Surveying Equipment: Trimble Total Stations: S3, S5, S6, S7, S8, VX, RTS seriesData Collectors: TSC2, TSC3, Spectra Precision Ranger 3Trimble Robotic Total Stations Other Compatible Brands: Proxim Stratum MP, Harmony APTranzeo, Wi-LAN, EnGenius access pointsIndustrial access points, gateways, and IoT devices with RP-TNC ports Step 1: Locate Antenna Ports Find the external antenna ports on your Linksys router, Cisco access point, or Trimble device. Most Linksys routers have 2 antenna connectors. Step 2: Remove Old Antennas Carefully unscrew your existing antennas by turning them counterclockwise. Most are hand-tightened—no tools needed. Step 3: Attach New AntennasScrew the RP-TNC male connector onto the RP-TNC female port. Hand-tighten only—do not use tools or overtighten to avoid damaging the connector. Step 4: Position for Optimal Signal Adjust the tilt-and-swivel hinge to angle antennas as needed: Routers: Position antennas vertically for maximum horizontal coverageMulti-story buildings: Angle antennas at 45° to improve vertical coverageMetal obstructions: Position antennas away from metal surfaces Step 5: Test & EnjoyPower on your device and enjoy enhanced wireless coverage. Compatibility Check: Ensure your device has RP-TNC female ports (internal threads with a center hole). This is the standard on most Linksys/Cisco products.Antenna Orientation: For omnidirectional antennas, vertical orientation generally provides the best horizontal coverage.Signal Environment: Actual range improvement depends on environmental factors including walls, interference from other electronics, and the transmit power of your device.Not for RP-SMA Devices: If your device has RP-SMA connectors (common on ASUS, TP-Link, Netgear), this antenna will not fit without an adapter. What's Included: 2x 6dBi Dual Band RP-TNC WiFi Antennas (2.4GHz/5GHz) Quality You Can Trust: 6dBi High Gain – 2-3x Stronger Than Stock AntennasDual Band Support – 2.4GHz & 5GHz for Maximum CompatibilityRP-TNC Male Connector – Exact Fit for Linksys & CiscoOmni-Directional 360° Coverage – Signals from All Directions180° Tilt-and-Swivel Hinge – Flexible PositioningWide Compatibility – Routers, Access Points, Trimble DevicesFactory Tested – Each Antenna Verified Before Shipmen See More

Características

• 🔹 6DBI DUAL BAND HIGH GAIN – UP TO 3X STRONGER SIGNAL Upgrade from standard 2-3dBi stock antennas to 6dBi and experience dramatically extended wireless coverage. Supports both 2.4GHz and 5GHz frequency bands—2.4GHz for longer range and better wall penetration, 5GHz for higher speed and lower latency. Perfect for streaming 4K video, online gaming, and eliminating dead zones in larger homes or offices.
• 🔹 RP-TNC MALE CONNECTOR – EXACT FIT FOR LINKSYS & CISCO DEVICES Features the industry-standard RP-TNC Male connector (reverse polarity TNC), which is the original antenna interface used by Linksys and Cisco for most of their wireless products. The connector features internal threads with a pinless design—ensuring a precise, secure fit. Simply unscrew your existing antennas and screw these on in their place—no adapters or tools required.
• 🔹 OMNIDIRECTIONAL 360° COVERAGE – NO AIMING REQUIRED Built with omnidirectional radiation pattern, these antennas capture and transmit signals from all directions simultaneously. Unlike directional antennas that require precise aiming toward the router, our omni-design works perfectly regardless of device orientation—ideal for routers, access points, and devices that may be moved or repositioned.
• 🔹 WIDE COMPATIBILITY – ROUTERS, ACCESS POINTS & INDUSTRIAL DEVICES Works with virtually any device equipped with RP-TNC female ports: Linksys Wireless Routers: WRT54G, WRT54GL, WRT54GS, WAP11, WAP54G, WRT160NL, E series, WRT1900AC Cisco Aironet: 340, 350, 1200, 1310, 2700, 2800, 3700 series access points Trimble Robotic Total Stations: S3, S5, S6, S7, S8, VX, TSC2, TSC3 data collectors Industrial IoT: Access points, gateways, and other RP-TNC wireless devices
• 🔹 FLEXIBLE TILT-AND-SWIVEL DESIGN – OPTIMIZE YOUR SIGNAL Each antenna features a 180° tilt-and-swivel hinge, allowing you to position antennas vertically, at a right angle, or any angle in-between. This flexibility helps you: Avoid metal obstructions that block RF signals Position antennas away from the router’s metal casing Optimize signal direction for better coverage in multi-story buildings
• 🔹 DURABLE CONSTRUCTION – BUILT TO LAST Built with premium materials and gold-plated RP-TNC connectors for corrosion resistance and optimal signal transfer. The flexible rubber housing resists bending and breakage. Operating temperature range: -20°C to +80°C. 50 Ohm impedance ensures compatibility with standard wireless equipment.
• ⚠️ INSTALLATION NOTE Simply unscrew your existing antennas and screw these on in their place—no drivers or software required. Hand-tighten only; do not use tools to avoid damaging the connector. For best results, position antennas vertically for maximum horizontal coverage, or angle them to avoid nearby metal obstructions.

Especificaciones