2X WiFi 6E Tri-Band Antenna 10dBi 2.4GHz/5GHz/5.8GHz High Gain MIMO RP-SMA Male for WiFi Router, PCIe Card, Wireless Adapter, Security Camera, ASUS/TP-Link/Netgear, External Omnidirectional Antenna

Descripción

Product description Is your router or WiFi card struggling to provide stable coverage throughout your home? The 2x WiFi 6E Tri-Band 10dBi High Gain Antenna Set is the solution you've been looking for. Engineered for the latest wireless standards, these antennas deliver the range, speed, and reliability needed for modern connected homes. Most stock router antennas are limited to 2-3dBi gain, sacrificing range for aesthetics. Upgrading to our 10dBi antennas can increase your wireless coverage area by up to 3-5 times, depending on your environment. Whether you're streaming 4K video, gaming competitively, or working from home, a stronger signal means fewer interruptions. What's Included: 2x WiFi 6E Tri-Band High Gain Antenna (10dBi, RP-SMA Male) Quality You Can Trust: 10dBi High Gain – Up to 3x Stronger Than Stock AntennasTri-Band Support – WiFi 6E Ready & Backward CompatiblePremium Construction – Gold-Plated Connectors, Corrosion ResistantFactory Tested – Each Antenna Verified Before Shipment Pro Tip: For routers with multiple antennas, positioning antennas at different angles (45°, 90°) can help optimize signal coverage across multiple floors and rooms. Technical Specifications Frequency Range 2.4 GHz: 2400-2500 MHz / 5 GHz: 4900-5850 MHz / 5.8 GHz: 5725-5850 MHz Gain 10 dBi (nominal) Connector Type RP-SMA Male Radiation Pattern Omnidirectional (360° horizontal coverage) Impedance 50 Ohms VSWR ≤ 1.5 Polarization Vertical Max Input Power 50W Operating Temp -40°C to +80°C Antenna Length Approx. 19-20 cm / 7.5-8 inches This antenna set works with virtually any device equipped with RP-SMA female ports: Routers & Access Points: ASUS RT-AC68U, RT-AC86U, RT-AX88U, GT-AX11000, and many moreTP-Link Archer series, Deco series (with external antenna ports)Netgear Nighthawk, Orbi (select models)Linksys WRT series, Velop (select models) Network Cards & Adapters: WiFi 6E PCIe cards (Intel AX210, Killer 1675x, etc.)USB WiFi adapters with external antenna connectorsALFA Network AWUS036ACH series Other Devices: IP security cameras with RP-SMA antenna portsWireless bridges and extendersIoT gateways and industrial equipment Step 1: Remove Old Antennas Carefully unscrew your existing antennas from the router, PCIe card bracket, or device. Step 2: Attach New Antennas Screw the RP-SMA male connector onto the RP-SMA female port. Hand-tighten only—do not use tools. Step 3: Position for Optimal Signal Adjust the flexible hinge to angle antennas vertically, horizontally, or at any position. For routers, positioning one antenna vertically and one horizontally can help cover both floors and rooms effectively. Step 4: Test & Enjoy Power on your device and enjoy enhanced wireless coverage. Compatibility Check: Ensure your device has RP-SMA female ports (the standard for most consumer routers and WiFi cards). If your device has SMA connectors, a separate adapter may be needed.Antenna Orientation: For omnidirectional antennas, vertical orientation generally provides the best horizontal coverage.Signal Environment: Actual range improvement depends on environmental factors including walls, interference, and device transmit power.WiFi 6E Requirement: To fully utilize the 6GHz band, both your router and client devices must support WiFi 6E. The 5.8GHz band is fully compatible with standard 5GHz WiFi. See More

Características

• 🔹 UPGRADE TO WIFI 6E – TRIPLE BAND COVERAGE Designed for the latest WiFi 6E standard, this antenna covers 2.4GHz, 5GHz, and 5.8GHz frequency bands . Enjoy enhanced performance across all your devices—2.4GHz for long-range coverage, 5GHz/5.8GHz for high-speed streaming and gaming. Fully backward compatible with WiFi 5 and WiFi 6 devices .
• 🔹 10dBi HIGH GAIN – SIGNAL BOOST FOR WHOLE HOME Experience up to 10dBi high gain performance—significantly stronger than standard 2-3dBi router antennas . This translates to extended wireless coverage, reduced dead zones, and improved signal penetration through walls and obstacles. Perfect for large homes, offices, or areas with weak signal.
• 🔹 2X2 MIMO TECHNOLOGY – ENHANCED THROUGHPUT The dual-antenna configuration supports 2x2 MIMO (Multiple Input Multiple Output) technology, allowing simultaneous data transmission and reception on multiple spatial streams . This results in faster speeds, more stable connections, and better performance in congested wireless environments.
• 🔹 UNIVERSAL RP-SMA COMPATIBILITY – PLUG & PLAY Features RP-SMA Male connectors, the industry standard for external WiFi antennas . Compatible with a wide range of devices: WiFi Routers (ASUS, TP-Link, Netgear, Linksys, etc.) Wireless PCIe Network Cards USB WiFi Adapters with external antenna ports IP Security Cameras, Wireless Bridges, IoT Devices WiFi 6E PCIe Cards from Intel, Killer, etc.
• 🔹 OMNIDIRECTIONAL DESIGN – 360° COVERAGE Built with omnidirectional radiation pattern, these antennas capture signals from all directions simultaneously . No need to point or aim—simply install and enjoy consistent 360-degree coverage. Ideal for both desktop and router applications where device orientation varies.
• 🔹 DURABLE CONSTRUCTION – FLEXIBLE INSTALLATION Each antenna features a tilt-and-swivel hinge (180° adjustable), allowing you to position for optimal signal reception . Built with premium materials and gold-plated connectors for corrosion resistance and reliable performance. Operating temperature range: -40°C to +80°C .
• 🔹 ⚠️ INSTALLATION NOTE When replacing existing antennas, simply unscrew your current antennas and attach these in their place. For PCIe cards, ensure the connectors are fully seated but do not overtighten. If your device has RP-SMA Female ports, these will connect directly. For devices with SMA connectors, a separate adapter may be required.

Especificaciones