Interruptor de transferencia automática de generador Generac de 200 amperios de próxima generación | Dispositivo de protección contra sobretensiones no integrado, sin clasificación de entrada de servicio, plataforma estándar de próxima generación

Descripción

Generac's 200-amp automatic transfer switch (model G0099520) is engineered for whole-home standby backup power, automatically moving your home's full electrical load from utility to a compatible 10–28 kW Generac standby generator the moment an outage is detected — no manual intervention needed. Is this a 30-amp or 50-amp switch? Neither — this is a 200-amp service-entrance-rated transfer switch designed for whole-home coverage, not a circuited switch for portable generator use. If you need to back up only 6–10 selected circuits with a portable generator, a circuited manual transfer switch is the better fit. Does it support both 120V and 240V loads? Yes. At 200A, 120/240V single phase, this switch handles the full panel including high-draw 240V appliances such as well pumps, central air conditioners, and electric dryers. How does it prevent backfeed? The open-transition design uses a mechanical interlock so that utility and generator power contacts physically cannot close simultaneously, blocking dangerous backfeed into the utility grid in compliance with NEC Article 702. Is the enclosure rated for outdoor use? Yes — the NEMA 3R enclosure protects internal components from rain, sleet, ice, and debris, with an integrated Fast-Mount system that reduces install time on standard residential exterior surfaces. Will it work with my GFCI or AFCI breakers? Yes — no breaker modification is required. Your electrician will verify load-side wiring to local code during installation. Does the kit include the inlet box and cord? No — this switch connects directly to a permanently installed standby generator. An inlet box and connection cord are only required for portable generator setups and are not part of this package. Professional installation is required for all line-side utility connections. The service-entrance-rated design also acts as the utility service disconnect, making it suitable for installations where a dedicated service panel is not present.

Características

• WHOLE-HOME AUTOMATIC BACKUP POWER: Automatically transfers your entire home from utility to a 10–28 kW Generac standby generator during an outage with no manual steps required
• OPEN-TRANSITION BACKFEED PROTECTION: Mechanical interlock ensures utility and generator contacts cannot close at the same time, preventing dangerous backfeed into the power grid per NEC requirements
• 200-AMP FULL-LOAD TRANSFER CAPACITY: Handles up to 200A at 120/240V single phase to power high-draw 240V loads like well pumps, central AC, electric dryers, and complete panel coverage
• NEMA 3R WEATHERPROOF ENCLOSURE: Steel enclosure rated for outdoor installation resists rain, sleet, ice, and debris, and the Fast-Mount system reduces field install time on standard residential exterior surfaces
• GENERAC EVOLUTION AND POWER ZONE 200 COMPATIBLE: Designed exclusively for use with single-phase Generac standby generators using Evolution or Power Zone 200 controllers rated 10–28 kW
• HARDENED CONTROL MODULE WITH BROWNOUT PROTECTION: Fuse-protected transfer switch control combats harmful utility disturbances including brownouts for reliable, code-compliant automatic switching performance
• LICENSED ELECTRICIAN INSTALLATION REQUIRED: Line-side utility connections require a licensed electrician; service-entrance-rated design acts as the utility disconnect, supporting NEC-compliant residential installations
• WHAT'S INCLUDED: Transfer switch enclosure with integrated hardened fuse control module and full installation documentation; inlet box and generator connection cord are sold separately

Especificaciones